...
A Software Download login is required to access the software download area. If you do not yet have a login, please contact support@calnexsol.com.
...
R16.0.
...
2
Features
Battery Enhancements
This release enables the use of Option 631 Battery Powered Operation. Instruments with this software release and Option 631 Battery Powered Operation fitted will benefit from the below features:Transport Mode - maintains phase accuracy of Sentinel’s disciplined internal Rb clock when mains power is removed, allowing for accurate reference when the instrument is transported to site.
UPS - should external power to Sentinel be interrupted, the internal battery will act as an uninterruptible power supply and allow Sentinel to continue to be used until power is restored or full discharge of the battery.
Battery powered measurements - allows Sentinel to operate without external power, maintaining accuracy of the Rb clock and enabling measurements to be made.
...
[SEN-2843] Clock channel triggers always on negative slope despite Slope setting. See Sentinel: Clock Channel Triggers Always on Negative Slope (Resolved) for more details.
[SEN-2992] 1pps TE channels not plotting in TIE+1pps TE mode, unless SyncE is enabled.
[SEN-3070] TE offset on 100BaseFX interface. See Sentinel: 100M Optical Interface Offset (Resolved) for more details.
[SEN-3194] “Enable OTA Low Power Mode” shows on Mode page when OTA Low Power Mode is enabled.
[SEN-3376] Battery not recognised for small subset of Sentinels.
...
R15.1
Note |
---|
Please read Sentinel: Clock Channel Triggers Always on Negative Slope (Resolved) before applying this software |
...
Note |
---|
Please read Sentinel: Clock Channel Triggers Always on Negative Slope (Resolved) before applying this software |
...
Note |
---|
Please read Sentinel: Clock Channel Triggers Always on Negative Slope (Resolved) before applying this software |
...