...
Fixes and Improvements
[PN-2469] Upgrade fail message due to no CSS is only displayed for a short time
[PN-3286] IPv6 & IPv4 not operating correctly
[PN-3313] G.8273.2 Noise Transfer Test does not stop correctly
[PN-3434] CAT starvation mode after less than 1 hour
[PN-2645] Separate start/stop buttons for PTP Master and Slave emulations
[PN-1491] SMPTE ST-2059-2, AES67 and AES67+SMPTE profiles
[PN-1830] Hide hidden files in File Management interface
[PN-2272] Added G.8262.1 Wander tolerance level 1 Noise pattern
[PN-2315] Support for 802.3cx timestamping
[PN-2469] Upgrade fail message due to no CSS is only displayed for a short time
[PN-1830] Hide hidden files in File Management interface2645] Added separate start/stop buttons for PTP M-Clock and S-Clock emulations
[PN-2676] Additional header field configuration for extended ESMC TLVs
[PN-2951] QSFP28-PAM4 modules occasionally report incorrect characters on part number/serial no.
[PN-3056] Automatically load appropriate rules file based on profile of PTP capturePTP capture
[PN-3061] Updated G.8273.4 Impairments to align with current ITU Standard
[PN-3243] 1PPS Reference Calibration value is settable when using internal 1PPS reference
[PN-3285] & [PN-3286] IPv4/IPv6 Unicast Ping / ND Address not correctly configuring
[PN-30613313] Update G.8273.4 Impairments to align with current ITU Standard2 Noise Transfer Test does not stop correctly
[PN-3285] IPV6 Unicast Ping / ND Address not correctly configuring3434] CAT starvation mode after less than 1 hour
[PN-3528] Paragon-Neo – Impairments status graph does not repeat[PN-3243] 1PPS Reference Calibration value is settable when using internal 1PPS reference
80.08.01.xx (Release 08.1)
...