Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Measuring the propagation delay between two ports of the Option 133 Converter is done using the Paragon-neo 1PPS Time Error Measurement function. Connect the two ports that you want to measure the propagation between one of to the Paragon-relevant neo 1PPS Reference Output ports reference port (RJ45 or BNC) and one of the relevant 1PPS Measurement ports measurement port (BNC or RJ45 or BNC).

An example connection is shown below for measuring the Option 133 Converter port 3 to port 4 propagation delay. All cables must be kept as short as possible and the length of the cables must be measured precisely. To avoid temperature effects, ensure that the Option 133 Converter propagation delays are measured at the same temperature as it will be used occur during final measurement tests.

...