...
If you have a Calnex SNE Ignite and a valid Calnex Support Service (CSS) contract, software updates the latest release can be downloaded from the Calnex Software Download siteCustomer Support Portal. Release notes are also available from the same location.
A Software Download login is required to access the software download areaCalnex Customer Support Portal. If you do not yet have a login, please contact support@calnexsol.com.
Software upgrade instructions can be found in the SNE Ignite Operating Manual, accessible from the GUI of the instrument.
...
Version 1.1.0
| View file | ||
|---|---|---|
|
Functionality
Jitter functionality that includes:
Added ability to apply jitter through the delay impairment.
Generate jitter profiles.
Upload and download profiles.
Additional Information
Please note that dual rate 10G/25G optical modules are not supported in SNE Ignite.
Version 1.0.0
| View file | ||
|---|---|---|
|
| Note |
|---|
This is a factory only release. Please contact Calnex Support if version 1 software is required. |
Functionality
This is the initial release version for SNE Ignite, featuring:
10G and 25G line rates
Support for Forward Error Correction at 25G (RS-FEC IEEE 802.3 Clause 108 RS (528,514))
Support for Jumbo packets (up to 12,000 byte frames) at all rates
Minimum system latency of 6.8us (8.2us in Jumbo Frame Mode)
Constant delay functionality • Packet drop functionality (burst, rate, rate periodicity)
Filtering of specific traffic types (including eCPRI, RoE and GTP)
Live Impairment changes
Internal/external Reference Clock
100% line rate
Functionality not part of this release
Jitter impairment - Please note for this release Jitter is disabled – Jitter to be added to upcoming release – contact support for details.
Additional Information
Please note that dual rate 10G/25G optical modules are not supported in SNE Ignite.