...
400G PAM4 | |||||
Interface | Reach | Manufacturer | Part Number(s) | Software Release When First Supported | Comment |
---|---|---|---|---|---|
QSFP-DD | LR8 10km | Coherent (Finisar) | FTCD1323E1PCL | R7 | Use at 400G rate only. |
QSFP-DD | FR8 2km | Coherent (Finisar) | FTCD1333E1PCL | R7 | Use at 400G rate only. |
QSFP-DD | SR8 100m | Coherent (Finisar) | FTCD8613E1PCM | R7 | Use at 400G rate only. |
QSFP-DD | FR4 2km | Coherent (Finisar) | FTCD4313E1PCL | R7 for FTCD4313E1PCL | Use at 400G rate only. FTCD4313E1PCL works for all scenarios. FTCD4313E2PCL works for all standard conformance tests, however some manually configured SyncE single sine frequency/amplitude combinations can cause link-loss. |
QSFP-DD | LR4 10km | Coherent (Finisar) | FTCD4323E2PCL | R11 | Use at 400G rate only. |
200G PAM4 | |||||
Interface | Reach | Manufacturer | Part Number(s) | Software Release When First Supported | Comment |
QSFP56 | SR4 | Coherent (Finisar) | FTCC8612E1PCM | R9 for FTCC8612E1PCM | FTCC8612E2PCM will be supported in a future release. |
QSFP56 | FR4 | Coherent (Finisar) | FTCC1112E2PCL | R9 | |
100G PAM4 | |||||
Interface | Reach | Manufacturer | Part Number(s) | Software Release When First Supported | Comment |
QSFP28 | DR | Innolight | TR-ZC13H-N00 | R9 | 100G PAM4 optical interface, instrument side is QSFP28 NRZ. Module supports measurement accuracy of ±15ns. |
QSFP28 | FR1 | Innolight | TR-ZC13T-N00 | R9 | 100G PAM4 optical interface, instrument side is QSFP28 NRZ. Module supports measurement accuracy of ±15ns. |
QSFP28 | LR | Innolight | TR-ZC13L-N00 | R9 | 100G PAM4 optical interface, instrument side is QSFP28 NRZ. Module supports measurement accuracy of ±15ns. |
SFP-DD | DR | Flexoptix | P.13S1HG.05.CAL | R11 | Calnex specific transceiver. Please contact Flexoptix for quotation: order@flexoptix.net. See Note 1 below. |
SFP-DD | FR | Flexoptix | P.13S1HG.2.CAL | R11 | Calnex specific transceiver. Please contact Flexoptix for quotation: order@flexoptix.net. See Note 1 below. |
SFP-DD | LR | Flexoptix | P.13S1HG.10.CAL | R11 | Calnex specific transceiver. Please contact Flexoptix for quotation: order@flexoptix.net. See Note 1 below. |
50G PAM4 | |||||
Interface | Reach | Manufacturer | Part Number(s) | Software Release When First Supported | Comment |
SFP56 | LR | Gigalight | LR GSS-SPO0500-LRCZ | R9 | |
SFP56 | ER | Gigalight | GSS-SPO500-ER | R10 | |
SFP56 | SR | Coherent (Finisar) | FTLF8556E1BCL | R7 |
Note1: Flexoptix transceiver part numbers are Calnex specific, denoted by the letters “CAL” in the part number. Flexoptix may add an extra “-MSA01” suffix to the part number for quotation and ordering purposes (eg P.13S1HG.10.CAL-MSA01).
SyncE Jitter
The modules listed below are those that MUST be used for SyncE jitter testing. These modules have been tested by Calnex to ensure that clock recovery can be bypassed and that they have sufficient bandwidth to allow the jitter performance of the device to be tested accurately. These modules are also known to operate correctly for PTP and SyncE Wander.
...