Calnex SNE Ignite: Releases
If you have a Spirent SNE Ignite and a valid service contract, software updates are available through the Spirent Customer Service Centre (CSC). On the Downloads page, select the Impairment Product Line.
A CSC login is required to access the Spirent software download area. If you do not yet have a login, please register on the site.
If you have a Calnex SNE Ignite and a valid Calnex Support Service (CSS) contract, the latest release can be downloaded from the Calnex Customer Support Portal. Release notes are also available from the same location.
A login is required to access the Calnex Customer Support Portal. If you do not yet have a login, please contact support@calnexsol.com.
Software upgrade instructions can be found in the SNE Ignite Operating Manual, accessible from the GUI of the instrument.
Version 1.1.0
Functionality
Jitter functionality that includes:
Added ability to apply jitter through the delay impairment.
Generate jitter profiles.
Upload and download profiles.
Additional Information
Please note that dual rate 10G/25G optical modules are not supported in SNE Ignite.
Version 1.0.0
This is a factory only release.
Please contact Calnex Support if version 1 software is required.
Functionality
This is the initial release version for SNE Ignite, featuring:
10G and 25G line rates
Support for Forward Error Correction at 25G (RS-FEC IEEE 802.3 Clause 108 RS (528,514))
Support for Jumbo packets (up to 12,000 byte frames) at all rates
Minimum system latency of 6.8us*
Constant delay functionality
Packet drop functionality (burst, rate, rate periodicity)
Filtering of specific traffic types (including eCPRI, RoE and GTP)
Live Impairment changes
Internal/external Reference Clock
100% line rate
*Refer to product datasheet for full specification.
Functionality not part of this release
Jitter impairment - Please note for this release Jitter is disabled – Jitter to be added to upcoming release – contact support for details.
Additional Information
Please note that dual rate 10G/25G optical modules are not supported in SNE Ignite.