The latest CAT and PFV software can be downloaded from the Calnex Software Download site.
A Software Download login is required to access the software download area. If you do not yet have a login, please contact support@calnexsol.com.
None
[CAT-6739] "Duplicate Key" error with duplicated Delay Responses
[CAT-6646] Intermittent spike in plot live mode (display issue only, capture data is fine)
None
[PFV-799] gmClockIdentity display reversed in PFV (rules check is OK)
[CAT-6638] Add masks for G.8273.4
[CAT-6598] Threshold limits set to 167ns to be added
[CAT-6513] Add TCL command to control Live Mode participation
[CAT-6512] HTTP commands to control Live Mode participation
[CAT-6503] Reports: New page for each metric
[CAT-6491] Improve DTE LF live mode performance
[CAT-6473] Restrict Number of samples processed in Live Mode
[CAT-6408] Improved 1PPS / ToD Performance
[CAT-6292] GET /api/cat/chart checks that ImageScale is provided
[CAT-6528] Improved plot colours in report
[CAT-6625] Live mode behaviour T1 time error update lags way behind T4 and 2 Way plots when sequence errors happen
[CAT-6605] Live mode Neo file analysis stops too early when two step clocks are involved
[CAT-6597] Text overlaying on PortEvent chart when events happen close together
[CAT-6591] Transient Response export options available when they should not be
[CAT-6587] CAT V26.0.20302.2304 - Data Export of Analysis Range to CDF either hangs system or reports error
[CAT-6572] Pkt TIE and Pkt FFO do not update in live mode.
[CAT-6570] CAT does not report the same ESMC QL as seen on Sentinel
[CAT-6560] Boundary Clock Absolute mode for PX (thru mode) should include peer delay metrics if relevant
[CAT-6495] x86 CAT silently crashes calculating MTIE for large file
[CAT-6486] clkFFO has no statistic values shown on graph
[CAT-6435] Fwd CF Accuracy spike on dropped PDel-Resp packet
[CAT-6420] Generate Report button is not disabled during metric calculation for Sentinel results
[CAT-6377] PX V3 Ptp capture files export to csv correctly but are imported as V2 and so lose V3 content
[CAT-6347] TDEV plots have a floor at 0.01ns - all values below this are truncated.
[CAT-5653] Require script API commands to return missing message statistics
[CAT-5653] Improved API responses to out-of-context missing message statistics request
[PFV-780] Take PFV out of live mode after 1hr
[PFV-723] Support for Power and utility P2P profiles
[PFV-733] Updated 802.1AS rules files to support the 2020 test profile available in Neo
[PFV-757] PathTrace TLV Remote Control Manual Incorrect
[PFV-745] Peer to Peer rules files passing when leap 59 or leap 61 set to true
[PFV-738] Cannot enable TLV fields in live mode
[PFV-710] paragonget PFV PTP Transitions does not include the decoded Correction Field
[PFV-623] When switching PFV field visibility on and off during live mode it was inconsistent in application and sometimes changing without user interaction
[CAT-6140] - Add G.8273.2 masks for media converters (G.8273.2 Appendix V)
[CAT-6271] - Add TDEV mask for G.8261 eSEC chain
[CAT-6390] - Add PRTC-B mask and rename PRTC to PRTC-A
[CAT-6391] - Display FlexE port events in CAT
[CAT-6277] - PktTIE resolution increase implementation
[CAT-5784] - 2 way Dynamic TE HF - initial results seem to be skewed by filter not being fully initialised
[CAT-5806] - CAT AreMetricsCalculated status returns false when all selected measurements have been calculated, expect true.
[CAT-5848] - Remote Control: Unable to set cTE averaging period or dTE normalisation and remove settling
[CAT-6013] - SaveAsImage sometimes saves the wrong chart
[CAT-6078] - Generate Report populating the wrong interface at the start of the report
[CAT-6126] - Displayed location of generated report is misleading
[CAT-6180] - After running out of memory and then trying to load large capture, CAT dies and P-neo needs a re-boot
[CAT-6275] - paragonget Cat {Metric} {Statistic} is returning ERROR: Undefined command
[CAT-6285] - Live Mode: DTE* metrics don't update if custom timer switched off
[CAT-6289] - Export to PDV missing first packet
[CAT-6294] - TC P2P using Measured Link Delay - Fwd CF Delta is not 0 as expected
[CAT-6295] - Possible CAT memory leak after many small captures
[CAT-6296] - CAT Live Mode disabled after only 45mins - following weekend of 1000's short captures
[CAT-6306] - When opening PDV file packet rate prompt doesn't let you delete first character.
[CAT-6311] - TC: MTIE calculation appears to be using the wrong TE data
[CAT-6312] - TC: Exported dTE data does not match settings on the UI
[CAT-6326] - CAT and PFV pop up 'File can't be opened now' when file is opening successfully
[CAT-6327] - Destination Array Not Long Enough exception
[CAT-6328] - Synchronisation Error in Pdv1588GeneratorAlgorithm
[CAT-6354] - TCL Cat Export commands always returning error
[CAT-6386] - Insufficient Memory on MTIE and TDEV metric, requires -ve (negative) memory
[CAT-6389] - Packet MTIE is incorrectly calculating tau
[CAT-6400] - CAT Failing to Export files - export not available when measurement is finished
[CAT-6402] - Peer delay metrics detect missing PDEL_RESP messages and mark the error on the CAT plots but details are not detailed in the metric legend and are not available from scripting
[CAT-6404] - Help for PDD/CDF: Looks to me as though the CDF example is wrong; shouldn't go above 100%
[CAT-6410] - Exception exporting 1PPS data
[CAT-6413] - Bad cable calibration value in Reports for Transparent Clock
[CAT-6415] - After entering starvation mode, CAT not updating with new measurement
[CAT-6416] - Generate Report not completing, so cannot save report
[CAT-6424] - SyncE wander offset display for ppb incorrect in live mode
[CAT-6425] - Calculation Error when running Transparent Clock with G8275.2 PTS Profile
[PFV-644] - PFV should collect average message rate data for PCAP capture files
[PFV-170] - PFV: Some changes to the rules - two 1588 profiles
[PFV-586] - Add ability to PFV to compare between fields
[PFV-388] - Profile G.8275.1 with 1588-2008 rules file fails announce messages
[PFV-389] - 1588-2008 rules file takes standards from both Default PTP (Annex J) and Annex A
[PFV-500] - Custom PFV rules file with space in name does not appear in Ruleset File drop down list and no warning
[PFV-576] - Some fields contained in Rules files do not return FieldErrorCount information.
[PFV-580] - PFV fields missing from Getting Started Guide
[PFV-588] - Cancelling analysis just closes the progress bar
[PFV-654] - G8271 Alarm hovering doesn't show correct flags set
[PFV-656] - Source Port Identity not checked properly
[PFV-658] - Import dialog has two dset file entries
[PFV-660] - CMCC _5G rules file has changed to disallow domain values 1-127.
[PFV-664] - Sentinel PCAP files have packet rate interpreted incorrectly.
[PFV-666] - Timeout Exception when trying to "View Rules"
[PFV-667] - PFV Rules File G8275.1 is not failing the test when packet rate is failing