Calnex SNE: How do I migrate my maps from 7.x to 11.x or later (Web UI)?

In the Web UI (firmware version 11.x onwards), maps are now stored on the instrument. This enables them to be accessed from any location on any browser.

Any maps created in 7.x (or earlier) must be migrated before they can be used. This is achieved as follows:

In the (7.x) GUI client, select the map to migrate from the Device / Map navigation panel.

Right-click and select Save map to disk:

In the Save As dialog, select an appropriate location and name then click Save:

Open a web browser and connect to the instrument (upgraded to 11.0) at http://<ip_address>

Select System > File Management

Select the Map Files tab:

Select Upload file(s):

In the Upload file dialog browse to the location where the map file was previously saved, select the file, and then click Open:

On successful import, the map will appear in the User Maps list on the Maps screen:

If any warnings or errors occur during the import process, a conversion report will be displayed containing any relevant information.

Notes:

  • GUI maps containing unsupported functionality are not supported via the import process.

  • Maps must be exported from GUI client 7.x. Earlier clients are not supported.