Reference, if Applicable

Description

All CVE's (see CVE Website ) relevant to NE-ONE's operating system, layered packages e.g. python, openssl etc have been applied, are per the base release v2024.07.1723.2 and are therefore update as of that version's build date.

Reference, if Applicable

Description

All CVE's (see CVE Website ) relevant to NE-ONE's operating system, layered packages e.g. python, openssl etc have been applied, are per the base release v2024.04.1723.1 and are therefore update as of that version's build date.

Reference, if Applicable

Description

All CVE's (see CVE Website ) relevant to NE-ONE's operating system, layered packages e.g. python, openssl etc have been applied, are per the base release v2024.04.1723 and are therefore update as of that version's build date - see below.

Reference, if Applicable

Description

NODPR-217

Starlink has now been separated into separate profiles, for: Starlink - Priority (Fixed), Starlink - Standard (Fixed), Starlink - Mobile Priority, Starlink - Mobile.

NODPR-241

You can now enable/disable of logging of variables in the ippe.log file Management (menu) -> Platform settings -> System preferences -> 'Enable logging for formulas and network variables'

-

Miscellaneous minor improvements

Reference, if Applicable

Description

NODPR-195

Using the GUI - Split, then changing the right hand side to have different values (asymmetric) then unsplit did not properly return both directions to the same values.  This is fixed.

NODPR-118

The City-City feature did not work correctly when updating a running emulation.  This is now fixed.

NODPR-217

The parameters for the predefined setting Satellite -> Starlink -> Good were (incorrectly) not asymmetric.

This is now fixed.  [See also the Starlink settings improvements above]

NODPR-240 

After importing a CSV file in the Network Variable feature, then changing the Unit to 's' (seconds) and and the Loop to Hold, it does not keep the change.  This is now fixed.

NODPR-218

It was not possible to use a (discrete) Network Variable which was increasing in the Minimum Latency (ms) and Maximum Latency (ms) fields. This was because the minimum was updated fractionally before the maximum causing minimum > maximum which is not allowed.  This is now fixed.
[They are now updated simultaneously.  This has also improved Network Variable performance slightly]

NODPR-226

There was an issue with concurrency in Javascript Custom Code which could cause the Javascript Engine to Crash.   This is now fixed.

NODPR-228

Importing a large csv file into the GUI could make the GUI unresponsive.

This is now fixed.

NODPR-229

The GUI could auto refresh while trying to update Network Variables. Sometimes the timeline would also disappear.

This is now fixed.

NODPR-232

In auto-configure routing if there was more than one path to the subnet, the shortest path would not alway ben the one chosen.  In some cases the forward and back path to the subnet were also different.

This is now fixed.

NODPR-245

Attempting to use t.ms and Network Variables in different fields did not work.  This is now fixed.

NODPR-249

Using different Network Variables in the Link Speed fields (Left and right) did not work correctly.  This is now fixed.

NODPR-250

Small GUI improvements in the Network Variables screens

-

Miscellaneous minor fixes

NODPR-234

Updating Network Variable time lines is not supported while the emulation is running. A new popup warns of this: "Please note that changes to network variables and timelines will not take effect until the network is restarted"

NODPR-235

Changing a field from using  a constant value to a formula after a network is started and vice versa is not supported.

NODPR-236

Updating formulas (or too/from formulas) is not allowed when the network is running - a new popup notifies of this: "Formulas cannot be updated while a network is running"

It is not supported to use t.ms and Network Variables in the same formula

-

Miscellaneous minor fixes

Reference, if Applicable

Description

NE1-362

Some customers have observed that the upgrade appears to time out with a session timeout message and then offer to refresh or login again from scratch at the end, rather than issue an upgrade completed successfully.  If this occurs to you, do not be concerned, the upgrade has completed successfully.  Just refresh your browser (with the browser refresh button) and you'll be able to login without issue.

Workaround

For the smoothest upgrade experience stop all running networks - you can right mouse click on them in the active network list (on the home page) and stop them from there.  Then refresh the browser (using the browser's refresh button).

Now you can upgrade using the standard method. Use the Web GUI to go to: Management [menu]→Platform settings→Software Update and then upload the appropriate update file (.itu file).   It will take several minutes to complete.   There should now be no timeout.

NE1-333

The Application Performance Report, which is reached when 'drilling down' in the Applications report, does not currently support downloading.  This will be added in a future version

NE1-334

If a lot of data has been collected it can take a while to produce the reports.  However, there is currently no visual indication of the need to wait.  This will be added in a future version

NE1-331

If you create a Top Level 'hardware traffic generation' soft port (under the system itself, not a sub-port) it will incorrectly ask twice for the port type.  It then goes on to properly set up the soft port

NE1-330

In the 'hardware traffic generation' soft port, if you set up a generating stream without choosing the Stream Type (which visually shows UDP) it errors on Save with 'Could not create port Port: gen1, Stream: 1- Stream Type must be TCP or UDP'

Workaround: Change the Stream Type to TCP then back to UDP

NE1-310

Clicking on an NE-ONE v5 scenario which has already been converted will not convert it again, unless the converted file is first deleted. No message is output.

NE1-281

Launching an 'old' point-to-point network using the new Play feature from the File Browser may generate a 'network Error - Object right: Cannot Open a connection to Input port (1) - likely it's already in use'.  This is because these older emulations were not 'relocatable', except by the Point-to-Point designer.   To solve the issue load the network into the point-to-point designer and (re)save it - this updates it to be relocatable - then Play from the file browser will work.

NE1-277

There are some artifacting issues in the port manager (though a number have also been fixed).  A browser refresh to redraw the screen will normally remove them

NE1-278

On the Azure and AWS platforms, logging on at the console goes directly to the command prompt - this is due to the platform constructing the default username in these cases

NE1-279

On Azure and AWS, the platforms directly take control of the console usernames and Management Port addressing.  At this time therefore the console menu does not appear on console login and GUI setting of the management port addresses is not functioning

NE1-222

On Desktop systems Generation 4 - the LCD will start even without the system being powered on leading to the false impression that the system was not starting.  Please 'short' press the power button if it does not appear to be coming on

NE1-100

Due to the large variety of network (emulation) designs customers have reported that certain legacy Emulations or  files from both INE v8/V9 and NE-ONE v5.0 have not automatically converted to NE-ONE v2022 format - if this happens please email them to support so that we improve the converter. (Many improvements were already made in this version). Where appropriate we will send back a correctly converted file

NE1-99

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy) & Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the function's impairment parameters so that it will not impair

Reference, if Applicable

Description

All CVE's (see CVE Website ) relevant to NE-ONE's operating system, layered packages e.g. python, openssl etc have been applied, up to and including those created on 22nd April 2024

We are not noting them individually at this time.

Reference, if Applicable

Description

NE1-336

New network configuration data for Oneweb, Starlink and Iridium.  This adds to the existing database of 2G, 3G, 4G, 5G, Wifi, GEO and WAN configuration data already present in NE-ONE.

NE1-355

Optionally set Latency and Loss asymmetrically on the Basic link settings page

It is now possible to set these parameters asymmetrically by using the new split feature next to the Common link parameters label.

Previously you had to go into advanced link settings to accomplish this

NE1-356

New feature to Swap Latency, Loss and Bandwidth parameters from one direction in a link to the other

Sometimes when using Asymmetric settings in the Basic settings dialog e.g. for Starlink, Oneweb or Iridium (see NE1-336)  or perhaps an Asymmetric DSL (ADSL) link the direction would be incorrect.  This new button, positioned next to the link name, swaps the values between the link's directions

NE1-337

Support for Moving Objects e.g. Vehicles, Aircraft, Trains and LEO Satellites etc.  

When you set parameters like Bandwidth, Linkspeed, Latency, Loss, Bit Errors, even routing, these have, up to now, been fixed values, until updated manually by a GUI user, automatically by a scenario, or automatically via the RESTful API.

We have aimed to make the places you can use these variables as ubiquitous as possible: in numeric parameter fields (including in TDMA and cloud rows), in routing and filter statements, in enable/disable checkboxes

Now, just like in Microsoft® Excel you can put in a variable that you define, or a formula involving time,  that you define (and optionally variables) and it's automatically computed and set.

More information on the specific features are outlined in NE1-338, NE1-339, NE1-340 and NE1-341 below. [The Software engineers amongst you will recognise that NE1-337 is in fact an 'Epic']

The features are fully documented, with many useful examples (for you to cut-paste), in the new Operator Manual which can be found onboard the NE-ONE in Help → Documentation in the new Chapter (16 currently): "Dynamic Formulas and Network Variables"

NE1-338

Enter dynamic formulas into fields, in a similar way that spreadsheets, like Microsoft® Excel allow formulas in cells.  

NOTE this feature is not available in all editions of NE-ONE

Wherever you could previously enter a parameter e.g.

• a number like a value for latency 

• a text field, like a route destination

• A check box, like an enable, disable on a route

you can now enter a formula, by right mouse clicking on the field.  A Formula box will open up where you enter a formula.

The language of the formula is JavaScript and you can use:

• JavaScript native functions e.g. Math.floor() etc. 

• some additional functions we have provided, 

• a special variable 't.ms' which has the value in milliseconds since the emulation was started

• discrete variables defined by you - see NE1-339

A simple formula for latency, then, could be:

t.ms / 1000

which would raise the latency by 1ms* every second, but:

• *Note that this formula can produce fractions, so after 500ms have elapsed it would produce 500/1000 = 0.5, so if you only want whole numbers of latency you can use:
  Math.floor(t.ms/1000)
  which rounds the computation down to the nearest whole number

• But this would still allow the latency to grow continuously (in whole millisecond increments) with no upper boundary, so using Math.max() can limit this (to 100ms in this example):
  Math.min(Math.floor(t.ms/1000),100)

• What if we'd like the latency to go back to 0ms after it got to 100ms and start counting up again.  Then we could use JavaScripts modulo (remainder) operator '%':
  Math.floor(t.ms/1000) % 101
  [why 101? because modulo (%) delivers a maximum value 1 less than the divisor (101)]

Math.floor(), Math.max() etc. are functions from the standard JavaScript Math library. / and % are standard JavaScript operators.

A formula's value is recomputed by default every 100ms, but this is settable (per Network) in the  Point-to-Point or Multi-Point/Mesh designers' File → Network Variables → Time Recalculation Rate option

The above are clearly just a few examples of what's possible, see the documentation chapter referenced in NE1-337 for details and examples

NE1-339

Define (discrete) time based, network variables which can be used wherever fixed parameter values were entered or in formulas (see NE1-338)

NOTE this feature is not available in all editions of NE-ONE

When defining a network (Point-to-Point or Multi-Point/Mesh) on the File menu, there is a new option called Network Variables. This is where you can define your own variables.

It works by first adding one or more named Timelines which consist of time sequences (time 0 and other times you want to update the variables at).

For each Timeline you can define one or more Variables and give the variables a value at each time offset.

The variables, e.g. x can then be used standalone (just the variable) or in combination e.g. Math.sin(x)*2 in formulas - see NE1-338

Sometimes you may already have variables or parameters you want to use from another product e.g. Microsoft® Excel or MathWorks® MATLAB, in this case you can upload a csv file exported by those products using the Import from CSV feature

These are clearly just a few examples of what's possible, see the documentation chapter referenced in NE1-337 for details and examples

NE1-340

Define Custom Code 

Sometimes simple one line formulas (see NE1-338) aren't sufficient and you need to write a block of code, or create a new function that you want to use in a formula.

For this we've provided a place you can enter custom (JavaScript) code which is stored and executed with the emulation

NOTE this feature is not available in all editions of NE-ONE

When defining a network (Point-to-Point or Multi-Point/Mesh) on the File menu, there is a new option called Custom Code. This is where you can define your own custom JavaScript code. The Custom Code dialog box permanently adds the custom JavaScript code to the network which is stored with the network definition and is executed automatically each time the network is started.

Custom code can be used with or without variables or formulas and it therefore is documented in its own chapter in the new Operator Manual which can be found onboard the NE-ONE in Help → Documentation in the new Chapter (14 currently): "Using the Script Editor and Custom Code"

NE1-341

Built-In Formulas  

Sometimes the JavaScript Math library doesn't quite have what you need, and while you could add more functionality with custom code (see NE1-340 above) - there are some useful functions we thought would save you and us a lot of time, so we pre-defined them:

• lerp (linear interpolation) 

• lerpOverTime (linear interpolation) over time

• sinewave - you define the frequency, amplitude etc

• convergentSine  - a sinewave that converges to amplitude 0

• PingPong - switch between a pair of values over time

NOTE this feature is not available in all editions of NE-ONE

The features are fully documented, with many useful examples (for you to cut-paste), in the new Operator Manual which can be found onboard the NE-ONE in Help → Documentation in the new Chapter (16 currently): "Dynamic Formulas and Network Variables" - section 4

NE1-342

Optimize Network Packet Performance by skipping unnecessary nodes (optional)

When data is sent from a Link to a Node and the only thing the node is going to do is to send it directly to a port (Hardware or Soft Port) then the node can be (optionally) skipped and the data sent directly to the port from the link.

The option to enable this can be found when defining a network (Point-to-Point or Multi-Point/Mesh) on the File menu, there is a new option called Optimize Network - a simple checkbox to turn it on.

There are implications, all correct behaviour when you consider them::

• The statistics for the node no longer show the data from that link, because it skips the node

• a Packet capture on the node will not show packets from the link, because it skips the node

• Live Packet Monitoring on the node will not show packets from the link, because it skips the node

The benefits are clear though, the node which is acting as router no longer has to handle or make a routing decision on the skipped packets reducing a potential bottleneck.

If tracing routing paths through a network using Live Packet Monitoring or taking Packet Captures from nodes it would be best to turn this feature off.  You can then turn it on again when tracing is complete for efficiency.

NE1-345

Auto Generated Routes

You can now define which subnets are attached to which nodes in the Multi-Point Designer by clicking the Node and choosing the Subnets option from the sidebar.  It's a list of subnets in CIDR notation per node.

Then when all the subnets are defined choose the Auto-Configure Routes → Recalculate Routes and it will calculate all the routes required in every node to make the routing to the destination correct.  A big time saver and mistake eliminator over doing it manually.

This works for all topologies - mesh, hub and spoke, cloud (including TDMA mesh), multi-hop, free form and mixtures of these.

If more than one path is available to a target subnet then the shortest path (literally, per the network drawing is chosen), so you can adjust the path by moving nodes on the diagram and recalculating again.

NE1-346

Populate subnets from soft ports

This is a time saving feature which goes hand in hand with NE1-345.

Rather than defining the subnets manually, if you've already attached IPv4 softports to the nodes then the subnets will be automatically set up using the soft ports IP address and subnet mask.  

To use this, from the Multi-Point Designer choose Auto-Configure Routes → Populate subnets from soft ports - the subnets will be added to the subnet list (see NE1-345) of every node with an IPv4 Soft Port attached. (Note if more subnets are needed then you can add them using the procedure outlined in NE1-345).  Then when done you can use Auto-Configure Routes → Recalculate Routes  to build the routing tables as per NE1-345

NE1-358

The Port Manager now has an optional list view mode

This feature is there to support easier use of large numbers of soft ports which could cause this non-list view to need a lot of panning etc.

To switch on list view navigate to Management → Preferences  and toggle the switch Use List Port Manager. The the port manager will now be in list view mode until switched back.

List view is a combination of expandable/collapsable port hierarchies with a scrollable display.

There is also a search box to locate a port by name in its heirarchy

Reference, if Applicable

Description

NE1-343

An option for Packet Replay (both PPR and IPR) which gets around the 100 streams selection limit

This is provided by a new workflow in the Packet Reply Dialog → Select Streams Feature called Custom filtering and routing. 

NE1-344

Filter which packets to send in Packet Replay using our powerful Expression Syntax

NE1-347

The diagnostic process invoked by the Management → Platform Settings → Diagnostics Gui option now provides additional data on Port statistics, Port Status, Packet Pools and Object status.

NE1-349

Support for the new 4 line LCD screen in the Generation 5 Desktop system has been enhanced

Initial support was first added for this new LCD panel in v2024.02.1556.2 - this has been enhanced:

• A section on how to use the new LCD has been added to the Operator manual

• Some Timeout values on dialogs have been improved for easier use

• The display now shows an NE-ONE, starting  message on start up not the default LCD Manufacturers Logo

• Many minor improvements

The operation of this screen and buttons is documented as the V2 LCD Panel Operation, section 3 in the LCD Panel Chapter (17, currently) of the Operator Guide 

-

Miscellaneous minor improvements

Reference, if Applicable

Description

NE1-348

City-to-city latency would not change values if a city was changed in an update.  This is now fixed.

NE1-349

In build 1556, versions: v2023.12.1556, v2024.01.1556.1 and v2024.02.1556.2, under certain workflows, parameters could be incorrectly written back to the Network with incorrect quotation marks involving backticks ` and quotes marks (", ').  This prevented the network from running until edited to be correct.  Patches were supplied to affected customers.  This is now fixed.

NE1-350

There were issues with using very large strings > 2047 characters which meant large 'Expressions' e.g. in Expression routes or Expression Filters would not work.  This is now fixed  

NE1-351

The boot splash screen would display as text, rather than graphic.  This is fixed

NE1-352

If a child port was added to a port in a port pair the port-pair was invalidly left pointing to the parent port, which is no longer directly usable as it has a child.  The port pair is now deleted if a child is added, with a warning message. 

NE1-353

PCAP files with packet sizes > 2048 bytes were not properly being handled in Packet Replay and Live Packet Monitoring.  This is now fixed

NE1-354

The 1st digits in large numbers are not visible in reports.  This was due to field width restrictions.  This is now fixed.

NE1-357

In advanced link settings it was not possible to change the link name.  This is now fixed.

NE1-359

Changing Linkspeed to 1.0 Mbps in Basic settings caused it to be replaced by 1 - this was a little troublesome if incrementally reducing bandwidth by 0.1 Mbps at a time while manually goal seeking, for example.

This is now fixed.

NE1-360

An engine crash could occur if a routing table was updated at the precise moment it was routing a packet.

This is now fixed

NE1-361

Attempting to change a hardware port status via the RESTful API call requests.put('https://<IP  address>/ippeapi/ports/0', …) could cause the engine to crash if the json body supplied to the put request was incorrect.

This is now fixed.

-

Miscellaneous minor fixes

Reference, if Applicable

Description

NE1-362

Some customers have observed that the upgrade appears to time out with a session timeout message and then offer to refresh or login again from scratch at the end, rather than issue an upgrade completed successfully popup.  If this occurs to you, do not be concerned, the upgrade has completed successfully.  Just refresh your browser (with the browser refresh button) and you'll be able to login without issue.

Workaround

For the smoothest upgrade experience stop all running networks - you can right mouse click on them in the active network list (on the home page) and stop them from there.  Then refresh the browser (using the browser's refresh button).

Now you can upgrade using the standard method. Use the Web GUI to go to: Management [menu]→Platform settings→Software Update and then upload the appropriate update file (.itu file).   It will take several minutes to complete.   There should now be no timeout.

NE1-333

The Application Performance Report, which is reached when 'drilling down' in the Applications report, does not currently support downloading.  This will be added in a future version

NE1-334

If a lot of data has been collected it can take a while to produce the reports.  However, there is currently no visual indication of the need to wait.  This will be added in a future version

NE1-331

If you create a Top Level 'hardware traffic generation' soft port (under the system itself, not a sub-port) it will incorrectly ask twice for the port type.  It then goes on to properly set up the soft port

NE1-330

In the 'hardware traffic generation' soft port, if you set up a generating stream without choosing the Stream Type (which visually shows UDP) it errors on Save with 'Could not create port Port: gen1, Stream: 1- Stream Type must be TCP or UDP'

Workaround: Change the Stream Type to TCP then back to UDP

NE1-310

Clicking on an NE-ONE v5 scenario which has already been converted will not convert it again, unless the converted file is first deleted. No message is output.

NE1-281

Launching an 'old' point-to-point network using the new Play feature from the File Browser may generate a 'network Error - Object right: Cannot Open a connection to Input port (1) - likely it's already in use'.  This is because these older emulations were not 'relocatable', except by the Point-to-Point designer.   To solve the issue load the network into the point-to-point designer and (re)save it - this updates it to be relocatable - then Play from the file browser will work.

NE1-277

There are some artifacting issues in the port manager (though a number have also been fixed).  A browser refresh to redraw the screen will normally remove them

NE1-278

On the Azure and AWS platforms, logging on at the console goes directly to the command prompt - this is due to the platform constructing the default username in these cases

NE1-279

On Azure and AWS, the platforms directly take control of the console usernames and Management Port addressing.  At this time therefore the console menu does not appear on console login and GUI setting of the management port addresses is not functioning

NE1-222

On Desktop systems Generation 4 - the LCD will start even without the system being powered on leading to the false impression that the system was not starting.  Please 'short' press the power button if it does not appear to be coming on

NE1-100

Due to the large variety of network (emulation) designs customers have reported that certain legacy Emulations or  files from both INE v8/V9 and NE-ONE v5.0 have not automatically converted to NE-ONE v2022 format - if this happens please email them to support so that we improve the converter. (Many improvements were already made in this version). Where appropriate we will send back a correctly converted file

NE1-99

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy) & Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the function's impairment parameters so that it will not impair

Reference, if Applicable

Description

NE1-335

Full hardware support for the new NE-ONE Gen 5 Desktop system, and in particular the new LCD display which that hardware features.

This is the new shipping version on all new NE-ONE Desktop Gen 5 systems

Otherwise, this release has identical features to v2024.01.1556.1 i.e. all the security enhancements which were applied on top of the functionality of v2023.12.1556 (see below)

Reference, if Applicable

Description

The operating system and layered packages have been updated to include all available security patches. These are provided in this NE-ONE update kit which, as usual, does not reach out to the Internet for any components. 

Of particular note is:  Protection against the recently identified SSH Vulnerability CVE-2023-48795.  With this vulnerability, the SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack.

More information is available on the NIST web site:

https://nvd.nist.gov/vuln/detail/CVE-2023-48795

Many other vulnerabilities have been closed in this update.  We mention here only those which may have an impact on the NE-ONE

Intel microcode: CVE-2023-23583

Linux Kernel: CVE-2023-45871 and others

SQLite: CVE-2023-7104 and 1 other

OpenSSH: CVE-2021-41617, CVE-2023-51385, CVE-2023-48795 (already mentioned), 

tar: CVE-2023-39804

glibc: CVE-2023-4806, CVE-2023-4813, CVE-2023-5156

Python: CVE-2023-40217

Reference, if Applicable

Description

NE1-313

The operating system has been updated to include all available security patches. All of these are provided in this NE-ONE update kit which does not reach out to the Internet for any components. 

In this release Python has been upgraded to the latest supported release v3.9.18 (which features security support until 05 Oct 2025 and directly fixes CVE-2023-40217 - see security release note for v2023.10.1377.1 below - NE1-312)

Reference, if Applicable

Description

NE1-318

New 'TDMA Mesh' feature.  This is a 'Cloud' type impairment function i.e. where multiple impairments are combined in a single (node) object.  As the name suggests this feature allows emulation of Time Division Multiple Access (TDMA) networks such as those found in commercial Networks and also Military Tactical Networks (like Link 11, Link 16 [TADIL J], Link22 and many more.

Examples networks for Link 11, Link 16 and Link 22 are included in the /Library/examples folder.

Parameters you can specify include:

• The number of slots

• The slot duration

For each internal ‘link’ (which may correspond to a Platform):

• Which slots will be used

• Transmission speed (bps) [often called bandwidth]

• Queue size

• Latency (additional to any slot wait time)

• Loss

and more…

See documentation for details

NE1-322

A new Impairment function called 'Pause Transmission Repeat' has been added to the Pause impairment function category.  This function features parameters: 

• Time Before First Pause 

• Pause Time 

• Time to Next Pause

•  …and whether or not to repeat.  

It is designed for regular pausing and buffering of communication such as in LEO satellite handover.

NE1-319

Support for new new 4 line LCD display in Generation 5 (Gen 5) Desktop System added in preparation for the future release of these systems

NE1-326

Allow Personalisation of the Login screen.  You can use your own graphic or choose from a selection of provided graphics (see Management --> Platform Settings --> Personalisation). You can also upload and force acceptance of your organisation's terms of use in a pdf file. This might be as simple as an 'Unauthorized Access Not Permitted' message or a much more substantial document  (see Management --> Platform Settings --> Compliance and audit)

NE1-327

New defence icons have been added (these may not be available in all product variants).  The included TDMA ring icon automatically adds the TDMA Mesh function - see NE1-318

Reference, if Applicable

Description

NE1-314

It could take a long time for Emulation scenarios to stop. This happened when in a long segment, as the emulation would only stop at the end of the segment.

It will now stop the scenario quickly even if a the start of a long segment

NE1-316

Improved details on messaging when a network cannot be started, or a soft port could not be created.

NE1-325

The maximum default pcap file size has been increased to: 20 Gbytes

NE1-328

The Point to Point Designer and Multi Point Designers both now allow the addition of a description for the network under File --> Description.  This was provided to allow the user to add information on the use of a particular network which would be attached to the network design itself

-

Miscellaneous minor improvements

Reference, if Applicable

Description

NE1-315

A few user rights were not enforced or enforced incorrectly.  Max networks and max objects are not enforced ability to create networks which is fundamental is now not policed

NE1-317

There could be issues if a network segment in a scenario was changed in the scenario. This is now prevented - Network segments should be modified outside the scenario builder

NE1-320

The IP soft port creation/update could fail, and possibly crash the emulation engine if the IPv4 address or IPv4 network mask was 0.0.0.0, not setup i.e. blank, or a bad value.  This is now prevented.

NE1-321

When network packets contained a vlan tag the packet was not properly decoded for the application report and application performance report leaving a blank report file.

This is fixed.

NE1-322

Live Packet Monitoring did not properly decode packets when vlan tagged

This is now fixed

NE1-324

Attempting to download a folder from the NE-ONE file system would create an error .  This operation is not currently possible and has therefore been blocked.

NE1-329

When upgrading from NE-ONE v5 or INE v9 some legacy settings for ntp inthe operating system would interfere with NE-ONE's docker implementation of ntp.  This has been fixed

-

Miscellaneous minor fixes

Reference, if Applicable

Description

NE1-333

The Application Performance Report, which is reached when 'drilling down' in the Applications report, does not currently support downloading.  This will be added in a future version

NE1-334

If a lot of data has been collected it can take a while to produce the reports.  However, there is currently no visual indication of the need to wait.  This will be added in a future version

NE1-331

If you create a Top Level 'hardware traffic generation' soft port (under the system itself, not a sub-port) it will incorrectly ask twice for the port type.  It then goes on to properly set up the soft port

NE1-330

In the 'hardware traffic generation' soft port, if you set up a generating stream without choosing the Stream Type (which visually shows UDP) it errors on Save with 'Could not create port Port: gen1, Stream: 1- Stream Type must be TCP or UDP'

Workaround: Change the Stream Type to TCP then back to UDP

NE1-310

Clicking on an NE-ONE v5 scenario which has already been converted will not convert it again, unless the converted file is first deleted. No message is output.

NE1-281

Launching an 'old' point-to-point network using the new Play feature from the File Browser may generate a 'network Error - Object right: Cannot Open a connection to Input port (1) - likely it's already in use'.  This is because these older emulations were not 'relocatable', except by the Point-to-Point designer.   To solve the issue load the network into the point-to-point designer and (re)save it - this updates it to be relocatable - then Play from the file browser will work.

NE1-277

There are some artifacting issues in the port manager (though a number have also been fixed).  A browser refresh to redraw the screen will normally remove them

NE1-278

On the Azure and AWS platforms, logging on at the console goes directly to the command prompt - this is due to the platform constructing the default username in these cases

NE1-279

On Azure and AWS, the platforms directly take control of the console usernames and Management Port addressing.  At this time therefore the console menu does not appear on console login and GUI setting of the management port addresses is not functioning

NE1-222

On Desktop systems Generation 4 - the LCD will start even without the system being powered on leading to the false impression that the system was not starting.  Please 'short' press the power button if it does not appear to be coming on

NE1-100

Due to the large variety of network (emulation) designs customers have reported that certain legacy Emulations or  files from both INE v8/V9 and NE-ONE v5.0 have not automatically converted to NE-ONE v2022 format - if this happens please email them to support so that we improve the converter. (Many improvements were already made in this version). Where appropriate we will send back a correctly converted file

NE1-99

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy) & Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the function's impairment parameters so that it will not impair

Reference, if Applicable

Description

NE1-312

The operating system has been updated to include all available security patches except Python (see below).  All of these are provided in this NE-ONE update kit which does not reach out to the Internet for any components. 

We still regard the operational risk of updating Python v3.7.17 to a later, security fix supported, version of Python to be large at this time and so have decided to provide security support for Python's 3.7.17, SSL run time module ourselves.

We have therefore backported the fix for CVE-2023-40217 (the only security fix made) from Python v3.8.18/v3.9.18 (which were identical) into Python v3.7.17's SSL module and have tested this.  This fix mitigates the issue and will bring Python v3.7.17, together with our fix, up to the same security level as Python v3.8.18 and 3.9.18, which are under support by the python team.

Reference, if Applicable

Description

NE1-311

After installing v2023.07.1376 the NE-ONE Professional Desktop Generation 4 appliance could run very slowly.

This release fixes that problem.

If you are running v2023.07.1376, on that appliance, and are experiencing this slowness, please contact support for the procedure to apply this release.

[How do you know if you have NE-ONE Professional Desktop Generation 4?  Answer, it is the only Desktop appliance with two Ethernet ports on the back (one of them blanked to prevent incorrect use).]

Details:

In version v2023.07.1376 the operating system, its packages, run time libraries etc.were updated to include all available security and bugfix patches. The operating system kernel was updated as part of this process.  Unfortunately there was an incompatibility between that new kernel/drivers and the NE-ONE Professional Desktop Generation 4 hardware which resulted in disk I/O being very slow.  This slows down the boot and all aspects where NE-ONE reads and writes from the disk.  No other hardware or virtual platform was found to be affected.

This problem is fixed in this version.

Other functionality is as per v2023.07.1376

Reference, if Applicable

Description

NE1-282

Intelligent Packet Replay of  PCAP files (IPR)  i.e. replay pcap files based on the original timing (or a multiplier) of the packets in the file, but also handle latency and losses correctly, as real systems would.  This is designed to maintain 'causality' (i.e. that a web response, for example, could not occur before the request) in the event of packet loss or packet delay. This has also been referred to as Stateful Packet Replay.

The number times the pcap file is to be replayed can be specified and the GUI will pop up with how long the run(s) have taken, allowing as assessment of how the network changes (bandwidth, latency, loss etc) have affected the pcap playback.

A selection mechanism allows the user to select which IP addresses appear from which nodes in the diagram. For more see the User Documentation.
NOTE.  The documentation also covers Intelligent Packet Replay (IPR) and Passive Packet Replay (PPR)

NE1-283

The operating system, its packages, run time libraries etc. have been updated to include all available security and bugfix patches.  All of these are provided in the NE-ONE update kit which does not reach out to the Internet for any components 

NE1-284

There is a new Automated Disk Space Housekeeping Feature (Management -> Platform Settings -> Housekeeping which allows you to specify when the disk space falls below a minimum amount (user definable) that certain logging and statistics files (user definable) should be removed and also how long certain file types should be kept

NE1-285

Physical Ports can now be brought (Electrically) up and down with the Port Manager (Port Status).  The port manager also notes the status of a port with a Green (Up) or Red (Down) indicator.  Note disconnection by the connected device (e.g. switch etc) will also change the indicator. 

NE-1-286

Protocol definition files were added to support PPPoE (Ethernet protocol hex 8864) in Expression selections. (PPPoE fields are PPPoE.version,  PPPoE.tos, PPPoE.code, PPPoE.Session_ID and PPPoE.Payload_Length).  This also handles IPv4 and IPv6 within a PPPoE packet

Reference, if Applicable

Description

NE1-280

More specific errors have been added in the event of a failure to create a Soft Port

NE1-287

A new statistics RestAPI call has been added - /ippeapi/reporting/running/network_all_ppo_timed_stats - this allows all object statistics for a specified time period to be retrieved

NE1-288

A non-Admin user could reach the Port Settings page in the Point-to-Point designer and attempt a change which was then correctly refused due to a lack of privilege to make this change.  The user is now prevented from accessing the Port Settings page in the GUI

NE1-289

ippe.log would show RestAPI times in local time but internal times in UTC.  All times are now written in UTC

NE1-290

Certain operating system packages would reach out to the Internet.  These were deemed unnecessary to the correct operation of NE-ONE and have been removed  

NE1-291

It is possible to turn on additional RESTapi request logging using the file /ippe/config/logging_request.json.  The default is off.  To turn it on change the key of "log on request" to be "on" and restart the NE-ONE  

NE1-292

If the management port is not connected the system will now continue to boot without waiting for 2 minutes to see if the port will become available

NE1-293

There is a new /ippe/config/ippe config parameter called portpair_sql_query_len.  The default if no setting is present is 512 bytes. You can increase this in the event of having a large number of Ports  e.g. 100s of Soft Ports, which leads to a large query, create a file in this folder called portpair_sql_query_len with contents portpair_sql_query_len =<value>.  

NE1-294

There is a new /ippe/config/ippe config parameter called override_fd_number.  The default if no setting is present is 128 (FD's).

If you use a lot of links (internally called FDs) both internal to the product as well as on the diagram then this can be increased by creating a file in this folder called override_fd_number with contents override_fd_number=<value>.

-

Miscellaneous minor improvements

Reference, if Applicable

Description

NE1-295

A large 70 link Point-toPoint network would not start due to a memory restriction in the Expression handler which is used for 'Link Qualification Criteria'.  This is now fixed

NE1-296

Mini Graphs could fail to appear, or be out of date, in the Point-to-Point Designer if the time on the user's PC and the time on the NE-ONE did not match.  This is now fixed

NE1-297

Packets dropped by a link would be counted as dropped in their 'parent' node' rather than in the link itself.  This is now fixed

NE1-298

The 'Pause Transmission' impairment function could fail to resume transmission after the specified time.  This is fixed

NE1-299

A fault in the (SSL) Certificates feature (Management -> Platform Settings -> Certificates) prevented the certificates and Private Key from uploading.  This is now fixed

NE1-300

There was a low probability issue in the POST javascript RestAPI call used to start and update running networks.  These would cause the emulation engine to reject a properly constructed request from time to time.
This is now fixed.

NE1-301

Sometimes Networks would be slow or very slow (minutes) to stop.  This could be interpreted as them failing to stop.  

This has been fixed

Note: Scenarios will always take longer to stop than regular networks 

NE1-302

It was not possible for a user to be able to run more than 1 network of (exactly) the same name.  While they would start the Point-to-Point & Multi-Point designers could update the incorrect network.  This is now fixed

NE1-303

In Live Packet Monitoring the Clear button would not always clear the pane.  This is now fixed

NE1-304

In Reports, timings in the time of a report folder and the times written into the report could mix UTC with local timezones.  These are now written in local time

NE1-305

There was a problem with the conversion of scenarios from NE-ONE v5 which required the converted file to be edited after conversion before use.  This is now fixed.

NE1-309

Omitting "IPv4_Interfaces[0].DHCP_Helper_Service_Name": "" from a RESTapi ippeapi/ports POST causes the emulation engine to fail.  This problem  only affects RESTapi users.  This is now fixed 

-

Miscellaneous minor fixes

Reference, if Applicable

Description

NE-310

Clicking on an NE-ONE v5 scenario which has already been converted will not convert it again, unless the converted file is first deleted. No message is output.

NE1-281

Launching an 'old' point-to-point network using the new Play feature from the File Browser may generate a 'network Error - Object right: Cannot Open a connection to Input port (1) - likely it's already in use'.  This is because these older emulations were not 'relocatable', except by the Point-to-Point designer.   To solve the issue load the network into the point-to-point designer and (re)save it - this updates it to be relocatable - then Play from the file browser will work.

NE1-277

There are some artifacting issues in the port manager (though a number have also been fixed).  A browser refresh to redraw the screen will normally remove them

NE1-278

On the Azure and AWS platforms, logging on at the console goes directly to the command prompt - this is due to the platform constructing the default username in these cases

NE1-279

On Azure and AWS, the platforms directly take control of the console usernames and Management Port addressing.  At this time therefore the console menu does not appear on console login and GUI setting of the management port addresses is not functioning

NE1-222

On Desktop systems Generation 4 - the LCD will start even without the system being powered on leading to the false impression that the system was not starting.  Please 'short' press the power button if it does not appear to be coming on

NE1-100

Due to the large variety of network (emulation) designs customers have reported that certain legacy Emulations or  files from both INE v8/V9 and NE-ONE v5.0 have not automatically converted to NE-ONE v2022 format - if this happens please email them to support so that we improve the converter. (Many improvements were already made in this version). Where appropriate we will send back a correctly converted file

NE1-99

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy) & Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the function's impairment parameters so that it will not impair

Reference, if Applicable

Description

NE1-239

Passive Replay of  PCAP files (PPR)  i.e. replay pcap files based on the original timing (or a multiplier) of the packets in the files.  A selection mechanism allows the user to select which IP addresses appear from which nodes in the diagram. For more see the User Documentation.
NOTE.  The documentation also covers Intelligent Packet Replay (IPR) which in addition to the above is designed to maintain 'causality' (i.e. that a web response, for example, could not occur before the request) in the event of packet loss or packet delay.  This IPR feature will be available in a future release

NE1-240

Graphing and getting Statistics from Historical data can now be performed.  This is found in the Reports & Graphs menu option by clicking on the new tile Historical Statistics and then navigating to the correct Network folder and then the correct run folder.  A display similar to the statistics menu option is shown with a summary of the statistics for the entire run.  To graph a particular value use the 'Launch graph' icon which appears when you hover over the relevant statistic value.

This feature is supported by a new RESTapi call: /ippeapi/reporting/summary_stats_for_run which can be used directly by RESTapi usersippeapi/reporting/summary_stats_for_run

NE1-241

Microsoft Azure Cloud is supported by NE-ONE in this release

Reference, if Applicable

Description

NE1-242

Several improvements to graphing including not exceeding the widget bounds when resizing the browser window

NE1-243

Allow the same (impairment) function to be used more than once in a link or node

NE1-244

In addition to highlighting the file 'Find in file browser' now also ensures that the file is at the top of the list to make it easy to spot

NE1-245

Statistics page improvement:  A new 'column' selection menu lets you hide/unhide  columns

NE1-226

You can now hide the subtree of a port in the Port Manager to make the display more manageable by right clicking on the port (avoiding the port name itself) whose sub-tree you wish to hide.  The sub-tree is then replaced by a + indicating that there are hidden elements.  Right click on the port (not the +, again avoiding the port name) to unhide the tree

NE1-246

The Composite routing function now has a new route field called Spoof Port In which allows it to 'change' the import port associated with the packet. This is created to allow Packet Replay to direct packets through the diagram as though they originated from that port.   It can be used for other purposes with care

NE1-247

All routing functions have a new route checkbox 'Only Allow Replay Traffic'.  This is used by Packet Replay to only route packets created by the replay feature

NE1-248

A new Copy File Path feature in the File Browser allows the copying of the file's path to the clipboard

NE1-249

To visualise when data is flowing through a link in the Multi-point (mesh) designer the lines are coloured green, if the traffic is only in one direction then the line is coloured orange and dashed

NE1-250

Several improvements to Live packet decode now gives significantly more detail on UDP, TCP, IPv6  and ARP packets

NE1-251

Improved the file browser to refresh automatically on changes

NE1-252

Removed the need for fixed names of the DHCP Relay - DHCP Helper service.  Any name can now be used for these services

NE1-253

Added a 'Freeze' on the ID and Name column in the statistics display so that they remain fixed when scrolling horizontally

NE1-254

Restrict the DHCP Help service to only show IPv4 soft ports instead of any leaf ports

NE1-255

Allow IPv4 softports to be used in DHCP Relay services  even if they have child ports (usually filter ports)

NE1-256

When Links=0 in the licence key it will now be hidden in My Model (on the homescreen) to avoid confusion, as this means that Links does not apply in this case

NE1-257

LDAP Authentication - a new file /ippe/config/user_list.json can be used to include valid ldap users for the NE-ONE which will then be created on first login according to the json parameters. This makes it easier to create the users initially.  Once a user is created this way the user name does not need to be kept in the json file.  Passwords in this file should be specified as * - it is ldap that controls the user authentication the password in the json file is there for future use with other authentication methods

NE1-258

On startup of the NE-ONE's emulation engine ports and services are now read from  json files called: /ippe/config/default_ports.json and default_services.json respectively.  This replaces the legacy method of command lines in the file /ippe/jail/scripts/default_ports.sh which will be deprecated in future. An automatic upgrade feature concerts from the legacy method

NE1-259

It is now possible to scroll the Edit Port sidebar in the Port Manager when it is too deep for the current window size

NE1-262

You can now directly run a network from the file browser using: File Browser -> <select MP Network> -> <Right Mouse> -> Play 

[see also a limitation in known issue NE1-281 below]

NE1-260

There could be too many 'Network Updated by API' messages when a network was frequently updated by the API.  A new user preference 'Allow the API to silently overwrite unsaved GUI changes on running networks' can suppress these 

NE1-261

If the scenario builder detects incompatible networks it will be more specific in indicating the incompatibility

-

Miscellaneous minor improvements

Reference, if Applicable

Description

NE1-263

A difference in time of day between the NE-ONE and the users web gui could cause graphs and mini-graphs to be plotted based on old data or not appear at all (no data). This is now fixed

NE1-264

Disk Usage pie charts could display the pie segments in the wrong color.  This is now fixed

NE1-265

When opening multiple graphs on same node from statistics page, and then clicking close on one incorrectly closes them all.  This is now fixed

NE1-266

The DHCP Relay service would not properly pass requests to the ports, preventing DHCP Relay working properly. This is now fixed

NE1-236, NE1-237

Some conversion NE-ONE v5 and INE emulation files were incomplete/incorrect.  This is now fixed

See also NE1-100 in known issues below

NE1-267

A few crashes when Live packet decode did not properly handle certain packet types are now fixed

Ne1-268

The NE-ONE v5 (impairment) functions Fragment_MTU, Random_Packet_Move_Offset, Random_Packet_Time_Reorder and Packet_Reorder_1_in_x were incorrectly omitted in NE-ONE v2022 Professional Edition.  This is now fixed

NE1-269

Radius authentication did not correctly handle alt_server (alternate server) and the use_tls fields. The latter leading to a crash.  These are now fixed

NE1-210

The SSL certificate details in Management→ Platform Setings → Certificate incorrectly always showed the information for an iTrinegy certificate, not the currently uploaded one.  This is now fixed

NE1-270

Packet Capture could incorrectly make huge (corrupt) files under certain circumstances.  This is now fixed

NE1-271

Reports could not be downloaded to docx files.  This is now fixed

NE1-272

The (scenario) outage transition did not work correctly for the  impairment random_drop.  This is now fixed

NE1-273

Decreasing loss and bandwidth in transitions were not working correctly.  This is now fixed.

NE1-274

Issues with the KNI layer would stop the management console appearing for External Networks.  This is now fixed

NE1-275

The default transmission service would not restart when a network was stopped when a non admin user was running the network.  This is now fixed

NE1-276

A crash could happen if the routing object id was changed in a link using a routing function.  This is now protected against. 

-

MIscellaneous minor fixes

Reference, if Applicable

Description

NE1-281

Launching an 'old' point-to-point network using the new Play feature from the File Browser (see NE1-262 above) may generate a 'network Error - Object right: Cannot Open a connection to Input port (1) - likely it's already in use'.  This is because these older emulations were not 'relocatable', except by the Point-to-Point designer.   To solve the issue load the network into the point-to-point designer and (re)save it - this updates it to be relocatable - then Play from the file browser will work.

NE1-277

There are some artifacting issues in the port manager (though a number have also been fixed).  A browser refresh to redraw the screen will normally remove them

NE1-278

On Azure and AWS the platforms logging on at the console goes directly to the command prompt - this is due to the platform constructing the default username in these cases

NE1-279

On Azure and AWS the platforms directly take control of the console usernames and Management Port addressing.  At this time therefore the console menu does not appear on console login and GUI setting of the management port addresses is not functioning

NE1-222

On Desktop systems Generation 4 - the LCD would start even without the system being powered on leading to the false impression that the system was not starting.  Please short press the power button if it does not appear to be coming on

NE1-100

Due to the large variety of network (emulation) designs customers have reported that certain legacy Emulation files from both INE v8/V9 and NE-ONE v5.0 have not automatically converted to NE-ONE v2022 format - if this happens please email them to support so that we improve the converter. (Many improvements were already made in this version). Where appropriate we will send back a correctly converted file

NE1-99

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy) & Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the function's impairment parameters so that it will not impair

Reference, if Applicable

Description

NE1-225

The console login user has changed from itrinegy to neone with default password neone. The username itrinegy remains operational but is deprecated - in a future version it will be removed.  The change password feature in the console program changes the password for both the neone and itrinegy users to the same value.  The console login screen has been changed to just have the banner NE-ONE (plus the IP address, as before)

Reference, if Applicable

Description

-

Miscellaneous minor improvements

Reference, if Applicable

Description

NE1-224

Where the link name(s) were different in two or more work in progress scenarios (i.e. loaded in the scenario builder), the scenario changeover to the second network element could fail with a invalid link message.  This is now fixed

NE1-223

Basic link settings dropdowns not repopulating from loaded active network, or load from file system network.  This is now fixed

-

MIscellaneous minor fixes

Reference, if Applicable

Description

NE1-222

On Desktop systems Generation 4 - the LCD would start even without the system being powered on leading to the false impression that the system was not starting.  Please short press the power button if it does not appear to be coming on

NE1-100

Due to the large variety of network (emulation) designs customers have reported that certain legacy Emulation files from both INE v8/V9 and NE-ONE v5.0 have not automatically converted to NE-ONE v2022 format - if this happens please email them to support so that we improve the converter. (Many improvements were already made in this version). Where appropriate we will send back a correctly converted file

NE1-99

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy) & Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the function's impairment parameters so that it will not impair

Reference, if Applicable

Description

NE1-219

New facility to be able to Live Packet Monitor through objects/links in the Web GUI - like an internal tcpdump.  NOTE this is for ease of tracing network paths and should not be left on at higher packet rates due to performance overhead.  See new option in Designers (Link & Node) and also the Statistics page

NE1-220

In Expressions a new @packet.loc[<offset>] is now available to test the value of a byte at a specific packet offset.  See documentation for details

Reference, if Applicable

Description

NE1-184

Add graphs page (links, comparison) now shows direction of link (from node)

NE1-212

Mean average line now shown on basic graphs

NE1-216

Added ability to update running network json via RESTapi by putting in filename.  This is in addition to being able to update in a direct post

NE1-218

Branding - Certificate Organisation changed to Calnex

-

Several Minor improvements

Reference, if Applicable

Description

NE1-170

When launching a graph from a link in a dual hop network, incorrect elements were graphed.  This is fixed

NE1-181

In a pair of emulations, one on ports 0-1 and one on ports 2-3 with same node names leads to graphing ambiguity.  This is now fixed

NE1-182

Changing node names were not re-evaluated by the graph tool, leading to them not being available for graphing.  This is now fixed

NE1-183

When going to the new graphs page it did not reevaluate ports and links available from the currently running emulations.  This is now fixed

NE1-185

When changing link names that have already been graphed the name doesn't update on the graph.  This is now fixed

NE1-211

Licensed topologies not showing properly in my model.  This is now fixed

NE1-193

First field in link basic settings not updating properly in RESTapi.  This is now fixed

NE1-201

Comparison graph in multi point designer does not distinguish between the directions.  This is now fixed.

NE1-214

GUI could get unwanted "changed by API" when you press Update All in main MP designer screen.  This is now fixed

NE1-215

Occasionally GUI could hang with RESTapi calls not being serviced. Added timesouts to SSL sockets to prevent this

NE1-217

Supplying an invalid link index e.g. in a RESTapi call could cause the engine to crash.  This is now prevented

NE1-221

For the Desktop systems with LCD, the LCD would not always initialise properly, especially on cold start (power applied).  This is now fixed

-

Many minor fixes to graphs

-

MIscellaneous minor fixes

Reference, if Applicable

Description

NE1-154

This is the first Calnex Solutions branded version of NE-ONE

NE1-155

NE-ONE is now available as an AMI for AWS directly from the AWS Marketplace (search for NE-ONE)

NE1-155

You can now directly upgrade from INE v9 to NE-ONE v2022 via the INE's patch feature.  This upgrades the software and the operating system and packages.  INE v9 now uses the same patch files as NE-ONE v5.

NE1-156

NE-ONE now supports running on Microsoft Azure.  Please contact support for the machine (VM) image

Reference, if Applicable

Description

NE1-158

New padlocks in Mesh Designer and Port Manager prevent accidental change of the diagram.  Click to Lock/Unlock

NE1-159

Notification of GUI users by events generated by changes to running networks by other GUIs or RESTful API is improved

NE1-160

Start and stop operations can sometimes take a little time - there are now waiting messages to show that the process is happening - these are removed when the operation is complete

NE1-161

It is now possible to suppress minigraphs (graphs that automatically are shown in the PTP single and PTP dual designers

NE1-152

Large improvements made to network update speed, by multithreading and using differencing for both Point-to-Point and Multi-Point designs

NE1-162

Miscellaneous improvements to Software Update process in the GUI

NE1-163

Miscellaneous improvements to graphing

NE1-164

The GUI now ignores out of date session expiry events.  Preventing old session expiry popups that are delivered after newly logging in

NE1-165

Hover over in Port Manager now suppressed when the mouse is moving

NE1-166

A few new waiting "spinners" were introduced where wait time on an operation is noticeable

NE1-167

If a network is opened multiple times it gets an increasing suffix e.g. _1 _2 to show the different  instances.  Returning to an active network opens the appropriate one

NE1-168

The software upgrade button is now greyed out if maintenance (which includes software updates) has expired, this prevents rejection of the update in the update process itself

NE1-169

Many miscellaneous improvements to the Port Manager

-

Several Minor improvements

Reference, if Applicable

Description

NE1-126

Newly created scenarios did not work with "find file in file browser".  This is now fixed

NE1-171

Miscellaneous fixes to the INE file converter

NE1-172

The GUI could receive multiple notifications of a change of the status of a network.  This is now fixed.

NE1-173

Packets from the KNI (used for dynamic routing services) could be incorrectly labelled.  This is now fixed

NE1-174

Changing the link qualifications in the RESTful API or another GUI would not be sent to the GUI of another user running that network.  This is now fixed

NE1-175

Sometimes you would receive multiple notifications when returning from Advanced Link settings to Basic Link settings. This is now fixed

NE1-176

Port 0 could not be moved (dragged) in the port manager.  This is now fixed 

NE1-177

Clicking on the "Play" button in a port pair in the menu bar could cause the GUI to fail.  This is now fixed

NE1-178

In the RESTful API an additional space could be introduced in a post depending on the encoding, this could cause the API call to fail. This is now fixed  

NE1-179

The GUI could fail on playing a newly created scenario (not saved and reloaded) under certain conditions.  This is now fixed

NE1-180

Several fixes in packet handling and packet disposal to improve product resilience in very unusual packet flows

-

MIscellaneous minor fixes

Reference, if Applicable

Description

NE1-222

On Desktop systems Generation 4 - the LCD would start even without the system being powered on leading to the false impression that the system was not starting.  Please short press the power button if it does not appear to be coming on

NE1-100

Due to the large variety of network (emulation) designs customers have reported that certain legacy Emulation files from both INE v8/V9 and NE-ONE v5.0 have not automatically converted to NE-ONE v2022 format - if this happens please email them to support so that we improve the converter. (Many improvements were already made in this version). Where appropriate we will send back a correctly converted file

NE1-99

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy), Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the function's impairment parameters so that it will not impair

Reference, if Applicable

Description

NE1-128

individual javascript updates through the RESTapi are now applied to the json view of the network, so that a reload into the GUI will have the complete up to date settings

NE1-130

Automatically update the running network in the GUI when updated incrementally through the RESTapi with javascript - this is related to NE1-128

NE1-144

AWS Certified.  This version has passed AWS certification

Reference, if Applicable

Description

NE1-127

Improved conversion of INE and NE-ONE v5 files to NE-ONE v2022

NE1-137

Several improvements were made to the GUI's handling of events to ensure that all events will pop up when they should

NE1-138

Some https agents did not correctly fill in the host field in the header leading to an exception which could delay RESTapi call handling while recovering from the exception.   This is now handled.

NE1-139

In VM installations it is possible to set up large numbers of processor sockets e.g. 8.  Only 4 are supported.  you are now informed of too many sockets rather than experiencing issues later.

NE1-140

If the NE-ONE was restarted then on re-login the GUI could incorrectly show the "old" status of networks in the toolbar.  It now checks to see what is actually running and adjusts the status accordingly

NE1-141

If you have not installed a certificate, then in the web browser you have to accept the generic certificate as OK to use.  However this permission is not permanent in the browser.  When it expires there is some mystery as to the reason your login credentials no longer work.  We now detect this and aim to inform you.

NE1-142

For RESTapi users json part of a network is now updated when a javascript update is sent, allowing visualisation of changes from the RESTapi using the GUI 

NE1-145

A confirm password box has been added to the change password screens to prevent typing errors

NE1-145

Vertical animation of graph lines has been removed to make graphs easier to ready when they are being updated

NE1-147

The user's preference for file browser mode - Tile or List is now remembered across sessions

NE1-149

It is now possible to use Find in File browser from the Point to Point Designer and Multi Point Designer in List mode (only tile mode was previously supported)

-

Several Minor improvements

Reference, if Applicable

Description

NE1-129

Turning packet capture on and off (which used events) would interfere with the delivery of network start stop events etc.  This is now fixed

NE1-131

Y-Axis Labels on graphs could exceed the available width when values were large.  They are now scaled by dividing by 1000,  1000000 etc (as appropriate) and labelled respectively K, M, G etc.

NE1-132

The GUI did not properly set up the nested properties in the Generic and Composite Filter causing these not to work.  This is now fixed

NE1-133

There was a memory leak in packet processing.  This is now fixed

NE1-134

Javascript garbage collection was not functioning correctly, leading to out of memory conditions if a lot of javascript updates were made, such as in a scenario with a tight loop or looping Javascript RESTapi calls.  This is now fixed

NE1-135

An ipperte engine crash referencing ippe_virtual_out_process_packet_with_classes_and_bandwidth has been protected against

NE1-136

There was a problem with capturing packets on soft ports.  This is now fixed

NE1-143

Clicking on an active emulation when it is already in the toolbar would cause a duplicate to appear in the toolbar.  This is now fixed

NE1-148

When using Save As on a scenario the "internal name" would not be changed from the original scenario.  This is now fixed

NE1-150

There was an issue with packets not being initialised correctly when received via KNI, and also of packets not being released when only receiving on KNI.  These are both now fixed

-

MIscellaneous minor fixes

Reference, if Applicable

Description

NE1-100

Due to the large variety of network (emulation) designs customers have reported that certain legacy Emulation files from both INE v8/V9 and NE-ONE v5.0 have not automatically converted to NE-ONE v2022 format - if this happens please email them to support so that we improve the converter.  Where appropriate we will send back a correctly converted file

NE1-99

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy), Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the functions impairment parameters so that it will not impair

NE1-126

For a newly created scenario file, if you click on "find in file browser" it does not highlight the file.  If you reload the file later then this is not an issue

NE1-152

Sometimes in the Multi-Point designer update is slow from pressing the button to receiving the popup

NE1-153

Packet drops does not count up in Internal Drops in graphs and statistics

Reference, if Applicable

Description

NE1-121

In order to be able to see the network diagram in the Multi Point Designer while configuring routing a new PEEK button has been created.  Hovering over this button shows the diagram below

Reference, if Applicable

Description

NE1-120

Minor updates to LCD software (Desktop Hardware) messaging when IP address cannot be determined

NE1-101

Several Improvements to External Routing, BGP, OSPF, RIP, etc.  RIPv6 has been renamed to the technically more precise RIPng in menus etc

NE1-105

fixed_delay_with_jitter function now appears in both Default and Labs libraries for compatibility with both NE-ONE v4/v5 and INE v9

NE1-109

Added Desktop System Motherboard GA-H17TN-00

NE1-110

An SSL problem introduced in some recent browsers could cause the built in Webserver to crash with an SSL length error.  It now restarts itself automatically in this case

NE1-112

In basic link settings it is now possible to select the dropdowns for Subtype and Link Quality out of order to change just these values without altering the Type.  Previously they were greyed out.

NE1-113

Software Update improvements:

1. On uploading a software update the spinning wheel has been replaced by a percentage progress bar.  

2. The GUI holds on a waiting page while checking that the new version has started.

3. after the update the running GUI checks if it needs to upgrade itself and if so forces an update (rather than using the current cached copy)   

Note, these  changes will be seen for the next update, not this update.

NE1-117

opening a network from the recent file list (e.g. on another port pair) twice now behaves in the same way as opening from the file browser and _n (e.g. _1, _2) is added to the subsequent instances.

NE1-119

After using "Upload from PC" the uploaded file now appears immediately in the recent files list

NE1-122

Miscellaneous Performance improvements

NE1-123

Updated Operator manual

-

Other minor miscellaneous improvements

Reference, if Applicable

Description

NE1-102

Change to upgrade procedure to ensure that when operating system components or packages are installed they will not look to the Internet for repositories

NE1-106

When Link Speed bit speed units were changed from bps to Mbps, Gbps etc the multiplication factor would also be applied to the congestion %.  This is now fixed

NE1-107

On the statistics page the lights for packet capture and reporting capture could flash incorrectly in the wrong colour.  This is now fixed

NE1-108

On session expiry the GUI could produce multiple session expired popups.  This is now fixed

NE1-111

If packet capture was turned on at high packet rates it would lead to memory exhaustion, causing the product to stop functioning, including processing RESTapi calls.  This would make it look like the GUI was not functioning.  This is now fixed

NE1-114

There was an issue with updating, disabling and then enabling ip addressing on port pairs.  This is now fixed

NE1-116

Attempting to (sideways) upgrade from a version to exactly the same version (i.e. all 3 parts of the version match) could cause an issue.  This is now prevented.

NE1-118

In scenario builder shrinking segments down to 1 second could not be resized up again.  This is now fixed

NE1-124

If a scenario was slow to start then a message could appear that the scenario had not started successfully, even though it was running.  This was due to a timing issue.  This is now fixed. 

NE1-125

If a link is deleted from within the link parameters, the GUI would crash with a "squiggly man" graphic.  This is now fixed

-

Other minor miscellaneous bug fixes

Reference, if Applicable

Description

NE1-100

Due to the large variety of network (emulation) designs customers have reported that certain legacy Emulation files from both INE v8/V9 and NE-ONE v5.0 have not automatically converted to NE-ONE v2022 format - if this happens please email them to support so that we improve the converter.  Where appropriate we will send back a correctly converted file.

NE1-99

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy), Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the functions impairment parameters so that it will not impair

NE1-126

For a newly created scenario file, if you click on "find in file browser" it does not highlight the file.  If you reload the file later then this is not an issue.

Reference, if Applicable

Description

-

None

Reference, if Applicable

Description

-

Improved console boot screen

-

Port Pairs are now always shown in alphabetical order

-

Licence policing changed to allow addition/removal of Processors (CPUs) and addition/removal of NICs (vNICs/Networks) in VM versions without requiring a licence update

-

other minor miscellaneous improvements

Reference, if Applicable

Description

NE1-104

Sidebar (object properties) are now closed when changing between editing networks, as otherwise an attempt to change the (out of scope) sidebar properties would causes a GUI failure

-

On a cold start (power cord removed/attached) the Desktop G4 hardware could arbitrarily switch network management port device name.  Our startup software now looks for this change and updates the operating system files to allow continued access by the IP address

-

other minor miscellaneous bugfixes

Reference, if Applicable

Description

-

Per version 2022.01.632

Reference, if Applicable

Description

-

Added Support for Desktop System Motherboard GA-H170TN-00

Reference, if Applicable

Description

-

Desktop LCD - Improved handling if IP details cannot be obtained

NE1-103

Maximum MTU is now increased from 9018 to the largest a card can handle. Exact details may vary with NIC card firmware - check /Support/system.log (aka ippe.log) for exact values

-

improved choice of portpair colours for professional (point-to-point) versions 

-

ISO Installer improved to support UEFI for Generation 4 Desktop hardware

-

other minor miscellaneous improvements

Reference, if Applicable

Description

-

minor miscellaneous bug fixes

Reference, if Applicable

Description

NE1-102

It has been reported (and verified by us) that some operating system packages provided in the v5.0 v2022  upgrade process attempt to access repositories via the Internet to resolve missing dependencies.  We are investigating whether this affects other software updates e.g. v2021.x  to v2022.n.  We are investigating with the aim to remove all external dependencies.

NE1-101

There is an issue with configuring the new external routing feature  i.e. (external BGP, OSPF and RIP) - we are researching this.

NE1-100

Certain legacy Emulation files from both INE V8/V8 and NE-ONE V5.0 have not automatically converted to NE-ONE v2022 format - if this happens please email them to support so that we can investigate

NE1-99

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy), Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the functions impairment parameters so that it will not impair

Reference, if Applicable

Description

NE1-82

On first login it will be a requirement to change the admin user's password from admin

NE1-83

A new force password change on next login feature in the User manager has been created for user admin

Reference, if Applicable

Description

-

Disk space check performed at an earlier point in Software Update with message indicating that update cannot be performed if too little space available

-

The OVA disk size for VMware has been increased to 100GB to ensure sufficient space available for report data storage etc

NE1-95

LCD now flashed with initial System Starting message for Desktop NE-ONEs

NE1-97

Improperly started networks will now show up in the active networks list allowing them to be closed and so free their resources

Reference, if Applicable

Description

NE1-86

If a link name was changed and then Advanced features were immediately selected without OK, the GUI would fail and need refreshing - this is now fixed

NE1-87

Occasionally the city to city latency function would show in link advanced settings but this is reserved for the built-in location function - this is now suppressed

NE1-88

A few Issues with the traffic generation soft port have been fixed

NE1-89

An issue with changing the node icon in the point to point designer would cause the GUI to fail - this has now been fixed

NE1-90

a link with advanced settings would not go directly into advanced mode without the user clicking advanced settings - this is now fixed

NE1-91

A few issues caused by language support have been fixed

NE1-92

The LCD could hang if the IP address of the management port could not be determined.  This is now fixed

NE1-93

A non privileged user could not start an emulation on ports assigned specifically to them in the port manager - this is now fixed

NE1-94

Enabling, then disabling, then re-enabling Default Transmission for a Port Pair would not work.  This is now fixed

Reference, if Applicable

Description

-

It is possible that certain legacy Emulation files from both INE V8/V8 and NE-ONE V5.0 will not automatically convert to NE-ONE v2022 format - if this happens please email them to support so that we can investigate

-

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy), Firefox support this feature. Safari does not support this feature

NE1-98

There is an issue with removing a function in advanced settings mode and then clicking the Update All button.  The function is not removed and its impairments persist.  A workaround for this is to set the functions impairment parameters so that it will not impair

Reference, if Applicable

Description

None

Reference, if Applicable

Description

None

Reference, if Applicable

Description

NE1-77

When clicking application reports it would say that the feature was unlicensed, even when this property was in the licence.  This is now fixed.

NE1-80

There was an issue in the Port Pair ports settings dialog box where the time spinner would keep spinning after an upgrade. This is now fixed

NE1-78

There was an issue upgrading port settings from NE-ONE v5 to NE-ONE v2022 which meant that Port Pairs were not properly built.  These are now no longer brought forward in the upgrade - this is documented in the upgrade guide.

NE1-79

There was an issue with pinging local ports from a non-local subnet. This is now fixed.

NE1-80

There was an issue where having no advanced functions in a licence file would invalidate the licence file. This is now fixed.

Reference, if Applicable

Description

As per 2022.01.587

Reference, if Applicable

Description

Support for NE-ONE (Professional) v5 upgrades - see separate upgrade guide

Stop networks without opening them by right clicking on their name in the  active emulations tab on the home page dashboard

Added ability to save, load and clear (erase all soft ports) port configurations in Port Manager function

New Multi widget/multi tab graphs with basic and comparison graph types and layout choices.  You can now have multiple graphs open on one page.  Each graph page can have multiple tabs, each with a different set of widgets.  Each widget can be of type basic graph or comparison graph 

Language support added.  First languages - French and German are in Beta:   most menu items are translated but Event messages and advanced function values are not yet translated.  We welcome your feedback

New External routing support added for BGP, OSPF, OSPF-v6, RIP, RIP-v6 - see Management → Platform Settings → External Routing and the context sensitive documentation from that page for details.  Setup uses the web console on that page

Port Pairs are automatically created where soft ports do not exist.  They are not automatically favorited for users though

Reference, if Applicable

Description

Improved error popups if network won't start

Many miscellaneous improvements to packet processing

Many miscellaneous improvements to logging in /ippe/logs/ippe.log (internal File Browser name /Support/system.log) including removing spurious messages, and downgrading error messages that were in fact just information 

For NE-ONE Desktop systems with an LCD Panel, the LCD software has been updated.  Operation is similar in general terms but there are many detailed improvements including context sensitive help on F5

Edit User screen layout improved

Unlicenced features will be shown "greyed out" by default, but can be completely hidden.  It is possible to later unhide them via Management → Preferences

More details about the current licence displayed on the Home page Model Information section

Clicking "More…" on the Model Information area on the homepage goes directly to the License Manager to display all the licence features

Several Improvements to the user documentation in addition to those required to describe the new features for NE-ONE v2022

Several miscellaneous improvements to the GUI look and feel, including icons

A new /Public/networks folder has been created for users to openly share network files with other users.  Initially there are no networks present in it

Reference, if Applicable

Description

Depending on timing ipperte (the emulation engine) could fail on Soft Port Deletion - This is now fixed

Depending on timing  ipperte (the emulation engine) could fail on Network (Emulation) Stop - This is now fixed

In point to point networks the choice of Mbps as a unit for the right hand node was not saved in the save file - This is now fixed

Reference, if Applicable

Description

It is possible that certain legacy Emulation files from both INE V8/V8 and NE-ONE V5.0 do not automatically convert to NE-ONE v2022 format - if this happens please email them to support so that we can investigate

The context sensitive entry into the User manual from particular screens relies on PDF destination markers, however not all browsers support this feature.  Chrome, Edge (Recent, non legacy), Firefox support this feature. Safari does not support this feature

Users are unable to re-enable “Default Transmission” after disabling it - fixed by a reboot.

Reference, if Applicable

Description

None in this release

Reference, if Applicable

Description

NE1-71

For multipoint networks files can now be imported only if all of the node and link names match. If they do not match an error is displayed

NE1-72

Unsaved changes on networks and scenarios is now preserved on session timeout

NE1-73

Point to Point and Dual Hop now have the names normalised

Other miscellaneous minor improvements

Reference, if Applicable

Description

NE1-74

Could not add new nodes after node 10  in multipoint designer unless you rename the nodes as you go - this is fixed

NE1-75

On stopping a scenario - it would show outdated error popups - thi is now fixed

NE1-76

Several issues with creating, running and stopping automatic scenarios have been fixed

Additional Minor Fixes

Reference, if Applicable

Description

None in this release

Reference, if Applicable

Description

NE1-48

New Management feature: Diagnostics - gathers diagnostics information for support purposes

NE1-47

Radius Authentication support - initial version

NE1-46

OVA now VMware certified

NE1-41

Added AWS support - including drivers

Reference, if Applicable

Description

NE1-65

ipmicfg added to product for configuring /checking ipmi (BMC) IP address etc

NE1-63

User manager now has a check all to select all ports and port groups

NE1-59

New tutorial videos added with choices of which video to view where more than 1 choice is valid

NE1-58

Software Update files are now .itu files, not tar files

NE1-57

Virtual platforms will set IP address to DHCP if an invalid netplan file is detected

NE1-56

Greatly enhanced applications and application performance reports with improved expert rule base for determining latency and bandwidth sensitivity, now also collapsing requests into transactions for ease of use

NE1-55

Several improvements to entering an emulation that is part of a scenario, including ensuring that on exit you are returned to the parent scenario

NE1-54

Alerts (Events) add links to filenames where appropriate

NE1-50

Host id removed from console menu as it is no longer the licence i

NE1-49

Advanced menu improved to include additional diagnostics and repair items

NE1-45

Date time in all log files is now in UTC - this was previously only true for ippe.log (system.log)

NE1-44

Core files in /ippe/logs are now compressed on restart

NE1-38

Added drivers to support updated kernels

NE1-39

Improved recognition of file types in file browser

NE1-40

Improved running of scenarios including keeping the link names of the first element

NE1-42

improved port manager - allowing ports to be repositioned

Reference, if Applicable

Description

NE1-35

• When there are 3 DNSservers in a DHCP environment the console menu option 0 gives an error

• this is fixed 

NE1-64

• The file browser would display times of files incorrectly due to a date/time formatting issue

• this is fixed 

NE1-62

• Out of order functions were dropping the re-ordered packets, due to a failure to re-insert them

into the packet flow - this is fixed

NE1-61

• The reboot and shutdown functions in the  Management --> Platform Settings -> Control  did not work

• they were acting on the container not the operating system - this is fixed

NE1-60

• On changing your password it was temporarily shown in a  confirmation popup. 

• This has been removed

NE1-53

• Link sub-array editor did not save changes - this affected any arrayed (table) link property

• This is fixed 

NE1-51

• After visiting the statistics screen these statistics  would continue to be gathered after navigating

away - this is fixed

NE1-31

• Disabling ntp stops snmpd service not ntpd - this is fixed

NE1-25

• Scenario Builder issues where user is not notified when the scenario did not start or is not running

• this is fixed 

NE1-34

• Error changing itrinegy password in console menu -  Error message "Unable to Change your password

please contact your support representative" - this is fixed 

NE1-33

• You cannot start an emulation as a non-admin user - this is fixed

NE1-36

• INE V9 Upgrade procedure did not remap soft port names from old libraries to new libraries

• this is fixed 

• There was an issue opening existing scenarios in the scenario builder. They would open from the recent

files list or the file browser - this is fixed NE1-37

• In multipoint designer and statistics you only get one direction when graphing a link and the

link direction is called "right" when no concept of right or left exists - this is fixed - NE1-67

Reference, if Applicable

Description

NE1-69

When Launching graphs from Graphs you do not get the choice of nodes

NE1-70

In statistics you only get one direction when graphing a link

NE1-26

Issue with timezones of dates in embedded filenames  

Reference, if Applicable

Description

Added table function "Staged Tables" to advanced latency choices - the table can be populated via

a JavaScript table or JavaScript function simulating a table.  This is primarily for REST API callback use in simulating user defined latency and loss patterns

New in place INE V9 to NE-ONE V2021 update kit available - no need to re-image the disk

upgrade preserves username and passwords from INE V9

INE V9 files are automatically preserved and copied to /Private/INEv9, similarly for /Public

upgrade kit preserves the complete version history from INE V9 to NE-ONE V2021

There is no need for backup and restore of INE V9 files (though backup is recomended)

Reference, if Applicable

Description

After the upgrade from V9 the Web UI now automatically goes to the login page

Event requests which could be numerous in the system.log (ippe.log) are now suppressed

Splash screen now also provided on boot of rack mount systems

Software update now moves hot fix patches to a temporary area to avoid any potential conflict

Apache and snmpd from the operating system could interfere with our web server and snmpd server - - these have been prevented from running

In advanced mode new functions (Edit) and existing functions display hover over help

log and error messages in system.log (ippe.log) are improved

Reference, if Applicable

Description

New in place INE V9 to NE-ONE V2021 update kit available - no need to re-image the disk

upgrade preserves username and passwords from INE V9

INE V9 files are automatically preserved and copied to /Private/INEv9, similarly for /Public

upgrade kit preserves the complete version history from INE V9 to NE-ONE V2021

There is no need for backup and restore of INE V9 files (though backup is recommended)

NE-ONE V5.0 Scenario conversion is now supported

INE Emulation file conversion is complete and covers most cases - please submit any that won't convert to support@itrinegy.com

Reference, if Applicable

Description

An issue with 1GB (Intel i350) card could cause a crash- this has been fixed

An issue with de-tagging a vlan tagged packet could corrupt the output packet - this is now fixed

A problem with packet capture not always working has been fixed

An issue could preventing some dual-hop (point-to-point) networks working - this is now fixed

An issue preventing city-to-city latencies working has now been fixed

A number of issues affecting the scenario (timeline) builder are now fixed

Renaming Nodes/Links in Multi-point editor would restore old node name is field was made empty - this is now fixed

Links were not shown in the (scalar) Port Out routing field, only ports were shown  - this is now fixed

Link fields which could be True or False were not displaying with check boxes (tick boxes) - this is now fixed

Going to the port manager & manipulating a soft port, from the Multi-point editor, and then back to the multi-point editor would cause the GUI to crash (squiggly person symbol) - this is now fixed

Reference, if Applicable

Description

The Performance Report is still undergoing improvements to its formatting and content

Not all INE V8/V9 files will convert automatically to V2021 - - please submit any that won't convert to support@itrinegy.com

When using networks in scenarios their links are changed to generic names to ensure compatibility between segments. We are working to improve the names for reporting, statistics etc

Management -> Platform Settings -> Control -> Shutdown and Reboot only shut down the product container, not the system (VM or Hardware).  To shutdown/reboot the entire system use the console menu instead:  ssh itrinegy@<NE-ONE IP Address> - enter password, then choose option S from the menu