...
Release 7 introduces 400G and 50G PAM4 optical interfaces. To achieve optimal timing performance with this release, specific optical modules as listed below MUST be used:
400G PAM4 | |||
Interface | Reach | Manufacturer | Part Number |
---|---|---|---|
QSFP-DD | LR8 | II-VI | FTCD1323E1PCL |
QSFP-DD | FR8 | II-VI | FTCD1333E1PCL |
QSFP-DD | SR8 | II-VI | FTCD8613E1PCM |
QSFP-DD | FR4 | II-VI | FTCD4313E1PCL |
50G PAM4 | |||
Interface | Reach | Manufacturer | Part Number |
SFP56 | SR | II-VI | FTLF8556E1BCL |
...
The modules listed below are those that MUST be used for SyncE jitter testing. These modules have been tested by Calnex to ensure that clock recovery can be bypassed and that they have sufficient bandwidth to allow the jitter performance of the device to be tested accurately. These modules are also known to operate correctly for PTP and SyncE Wander.
100G | |||||||||
Interface | P100G / Neo PortReach | Manufacturer | Part Number | Comment | |||||
---|---|---|---|---|---|---|---|---|---|
QSFP28 | LR4QSFP28 | Finisar | FTLC1151RDPL | No longer available from vendor. | |||||
QSFP28 | LR4QSFP28 | Finisar | FTLC1154RDPL | ||||||
QSFP28 | SR4 | QSFP28 | Finisar | FTLC9551REPM | |||||
CXP | SR10CXP | Any Reputable Vendor | |||||||
40G | LR4|||||||||
Interface | Reach | Manufacturer | Part Number | Comment | |||||
QSFP+ | LR4 | Finisar | FTL4C1QE2C | ||||||
25G | LR|||||||||
Interface | Reach | Manufacturer | Part Number | Comment | |||||
SFP28 | LR | Finisar | FTLF1436W4BTV | ||||||
SFP28 | LRSFP28 | Finisar | FTLF1436P3BCL | ||||||
SFP28 | SR | SFP28 | Finisar | FTLF8536W4BTV | |||||
SFP28 | SR | SFP28 | Finisar | FTLF8536P4BCL | |||||
SFP28 | SRSFP28 | Finisar | FTLF8538P4BCL |
SyncE Wander and PTP
For PTP and SyncE Wander on non-PAM4 interfaces, the following modules are known to operate correctly (in addition to those above).
100G | |||||
Interface | P100G / Neo PortReach | Manufacturer | Part Number | Comment | |
CFP2 | LR4 | CFP2 | Finisar | FTLC1141RDNL | Rev 1 Paragon-100G only |
CFP2 | LR4CFP2 | Oclaro | TRB5E21FNF-LF002 | Rev 1 Paragon-100G only | |
CFP2 | LR4CFP2 | Lumentum (JDSU) | JC2-10LM4AA1 | Rev 1 Paragon-100G only | |
CFP4 | LR4 | CFP4 | Finisar | FTLC1121RDNL | Paragon-100G only |
QSFP28 | LR4QSFP28 | Finisar | FTLC1151RDPL | Now obsolete | |
QSFP28 | LR4 | QSFP28 | Finisar | FTLC1154RDPL | Replacement for FTLC1151RDPL |
25G and 10G | SR|||||
Interface | Reach | Manufacturer | Part Number | Comment | |
SFP28 | SR | Finisar | FTLF8536P4BCV |
For SyncE wander and PTP at 1G and 10G we expect all correctly configured modules to operate correctly. At other line rates we expect most correctly configured modules to operate correctly.
...