Versions Compared

Old Version 1

changes.mady.by.user Gordon Muir

Saved on

compared with

New Version 2

changes.mady.by.user Neil Jackson

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

If you have a valid Calnex Support Service (CSS) contract, the The latest Sentinel and CAT software can be downloaded from Software Downloads on the Calnex website. Release notes are also available from the same location.

...

Features

  • 10GbE functionality.

Info

Notes:

  • New options and hardware are required to enable 10GbE functionality. Existing instruments with serial numbers greater than 300000 may be upgraded. These upgrades are hardware-upgraded for 10GbE functionality; this upgrade is return-to-factory.

  • CAT v24.00 or later is required for data analysis

  • Non-10GbE instruments may also be upgraded to R11

Defect Fixes

  • [SEN-1085] Ethernet Gateway Ping button is enabled when DHCP is enabled

  • [SEN-1151] Sentinel doesn't reach 128 packets per second for Delay Request rate

  • [SEN-1726] Configuring Sentinel from Electrical to optical ethernet results in no RevPDV being recorded

  • [SEN-1781] Apply button will only change IP address / Mask / Gateway setting on the first press

  • [SEN-1796] Protocol check does not detect Delay Response if multiple PTP multicast flows are present

  • [SEN-1803] Moving from GNSS settings page with invalid value on antenna delay causes crash




...