The latest Sentinel and CAT software can be downloaded from Software Downloads on the Calnex website. Release notes are also available from the same location.
A CSS login is required to access the software download area. If you do not yet have a login, please register on the site.
R11
Features
10GbE functionality
Notes:
New options and hardware are required to enable 10GbE functionality. Existing instruments with serial numbers greater than 300000 may be hardware-upgraded for 10GbE functionality; this upgrade is return-to-factory.
CAT v24.00 or later is required for data analysis
Non-10GbE instruments may also be upgraded to R11
Defect Fixes
[SEN-1085] Ethernet Gateway Ping button is enabled when DHCP is enabled
[SEN-1151] Sentinel doesn't reach 128 packets per second for Delay Request rate
[SEN-1726] Configuring Sentinel from Electrical to optical ethernet results in no RevPDV being recorded
[SEN-1781] Apply button will only change IP address / Mask / Gateway setting on the first press
[SEN-1796] Protocol check does not detect Delay Response if multiple PTP multicast flows are present
[SEN-1803] Moving from GNSS settings page with invalid value on antenna delay causes crash