Page Comparison

...

Information on how to install a new software release is available in this article.

...

80.05.00.32 (Release 05.00 Update)

Note
To upgrade from version 2.1 to version 5, you must first upgrade to version 4. Please contact support@calnexsol.com if you require assistance to do this.

This release addresses the following issues:

[PN-2167] 10G->100G exhibits clocking issues, with internal bus failures and no packets
[PN-2145] Instrument Mode / Time Source: UTC label on "Current Time" is mis-leading
[PN-2141] FlexE Dropping PTP Packets with IPG less than 56B
[PN-2156] Conformance test, SyncE-xxx, wander transfer table oddity; PTP generation stops unexpectedly

This release includes CAT v26.00 and PFV v26.00.

...

FlexE 100G: Allows a FlexE Overhead Sync Test, enabling 100GbE (4x25G) FlexE interface for testing synchronization as per ITU-T G.8312. PTP and/or SyncE testing capabilities of Paragon-neo can be extended with the same sub-ns precision to the testing of synchronization within the control overhead.
E1 / T1 Wander Measurement: High Accuracy frequency measurement of E1 and T1 clock signals
Samba access to the internal hard drive is now password protected: See this article for details.

[PN-976] - Exception trying to update fitted transcievers (UTF-8 and database issue)
[PN-1025] - Exception trying to update fitted transceivers: System.IO.IOException: Unable to read data from the transport connection: Operation on non-blocking socket would block
[PN-1740] - 1 in 30 POST fails due to 10MHz mmcm unlocked
[PN-1831] - Jitter limit services for SFP28 interface depend on wrong feature
[PN-1856] - IPv6 Neighbour Discovery multicast link layer address is incorrect
[PN-1857] - IPv6 Neighbour Discovery request handler incorrectly checks Dest MAC address
[PN-1890] - Removing optic stops ESMC generation on the other port
[PN-1897] - Add a warning / updated the quick help to explain the use of Slave multicast MAC address
[PN-1941] - Neo commanded restart causes exception/error

...