The antenna supplied with Sentinel has a 20m cable, which equates to a delay of 100ns.
Setting the Sentinel antenna delay while GNSS is connected could cause a step change in the 1PPS phase input to the internal Rubidium oscillator and will require the Sentinel to be re-disciplined for a period of 6 hours. To avoid this the following procedure should be followed.
| Panel |
|---|
In the Settings→Measurement→TimebaseSettings→Measurement→Timebase page set Internal Reference Disciplining Mode to Never Press Apply Connect the GNSS antenna to Sentinel  Image Removed Image AddedNOTE: The Rubidium icon will change to a green unlocked padlock. Select the GNSS tab and enter the Antenna Delay Press Apply  Image Removed Image AddedWait 10 minutes Go back to the Settings→Measurement→Timebase Settings→Measurement→Timebase page set Internal Reference Disciplining Mode to Always or Not during measurement Press OK
 Image Modified
NOTE: The Rubidium icon will change to yellow The Rubidium icon should change to a green locked padlock after 5 minutes.
 Image Modified Measurements can now be started using the new antenna delay setting.
|
Related articles
| Filter by label (Content by label) |
|---|
| showLabels | false |
|---|
| max | 5 |
|---|
| spaces | com.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@957 |
|---|
| sort | modified |
|---|
| showSpace | false | sort | modified |
|---|
| reverse | true |
|---|
| type | page |
|---|
| cql | label in ( "gnss" , "sentinel" , "gps" , "disciplining" ) and type = "page" and space = "KB" |
|---|
| labels | sentinel gps gnss disciplining |
|---|
|
...