| Note |
|---|
For PAM4 interfaces or SyncE Jitter testing, specific modules MUST be used. These modules have been tested by Calnex to ensure they fulfil the requirements for functionality and performance needed to enable correct operation and guarantee the integrity of the timing measurements. Use of other modules may result in a failed test or incorrect result. For SyncE Wander and PTP on non-PAM4 interfaces, most modules should work correctly; known exceptions are detailed below. If you have a module that is not recognised, please let us know. |
| Note |
|---|
DAC assemblies must not be used with Paragon-neo. Paragon-neo is not designed for use with DACs, which means that such links are unlikely to work and there is a possibility of damaging your instrument. Such damage would not be covered under CSS. |
PAM4
Release 7 introduces 400G and 50G PAM4 optical interfaces. To achieve optimal timing performance with this release, specific optical modules as listed below MUST be used:
...