...
Set up the impairment filters using the following steps
Select Flow - Capture Packets
run Flow Wizard
Identify message type to impair
close window
Select Add Impairments/Delay
Ensure it is set to Enabled and Variable Delay Insertion is enabled
You need to select which Port to apply the PDV, for forward select Port 1, for reverse select Port 2
When the Port is selected choose User Defined, click on Import and select the PDV file you saved above
To start the PDV replay press the Start Impairments button at the foot of the page
...
press the Add Impairments/Delays button
select Flow Filter to set the message Filter
Selecting Sync will mean that delays will be applied to Master 1 Tx and Delay Request will be applied to Master 1 Rx
...