$customHeader
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

If you have a Spirent SNE Ignite and a valid service contract, software updates are available through the Spirent Customer Service Centre (CSC). On the Downloads page, select the Impairment Product Line.

A CSC login is required to access the Spirent software download area. If you do not yet have a login, please register on the site.

If you have a Calnex SNE Ignite and a valid Calnex Support Service (CSS) contract, software updates can be downloaded from the Calnex Software Download site. Release notes are also available from the same location.

A Software Download login is required to access the software download area. If you do not yet have a login, please contact support@calnexsol.com.

Software upgrade instructions can be found in the SNE Ignite Operating Manual, accessible from the GUI of the instrument.


Version 1.0.0

This is a factory only release.

Please contact Calnex support if version 1 software is required.

Functionality

This is the initial release version for SNE Ignite, featuring:

  • Support for 10G / 25G

  • Support for jumbo packets (up to 12,000 byte frames)

  • Minimum System latency of 6.8μs • Resolution of up to 1ns

  • Support for delay functionality (Burst, Rate, Rate Periodicity)

  • Support for filtering and drop impairments

  • Support for eCPRI/RoE and GTP Filters

  • Support for live Impairment changes

  • Support for internal / external Reference Clock

  • Support for Forward Error Correction

  • Support 100% line rate

Functionality not part of this release

  • Jitter impairment - Please note for this release Jitter is disabled – Jitter to be added to upcoming release – contact support for details.

Additional Information

  • Please note that dual rate 10G/25G optical modules are not supported in SNE Ignite.

  • No labels