...
Attachments | ||||||
---|---|---|---|---|---|---|
|
Sinusoidal Model Patterns (from WG4.CONF v09.00)
These patterns use the sinusoidal tones specified in O-RAN CONF v09.00 Table 3.3.7-1 to create the time/phase errors. They will be built-in to Paragon-neo from R12.
The amplitudes used in these patterns have been modified from the earlier version (below) to better represent the limits defined by the MTIE mask from G.8271.1; the frequencies used have not changed.
These new amplitudes are slightly higher than the previous values, and may therefore cause an O-DU that previously marginally-passed to now fail. Compliance with WG4.CONF requires that these new patterns are used for testing.
Attachments | ||||||
---|---|---|---|---|---|---|
|
Superseded Sinusoidal Model Patterns (from WG4.CONF v08.00 and earlier)
These patterns use the sinusoidal tones specified in O-RAN CONF v08.00 and earlier, Table 3.3.7-1 to create the time/phase errors. They are built-in to Paragon-neo R10 and R11.
...