The Paragon-X GUI shows a number of green/red indicators, which I believe are referred to as 'soft LEDs'. What do these actually mean in the Connected Slave and Connected Master panels?
...
Panel |
---|
The meaning of the LEDs in these panels varies according to whether the test is running in multicast or unicast mode: Multicast: Grey | P-X master was receiving Del_Req messages from the Slave but the P-X master is now inactive |
---|
Green | P-X master is receiving Del_Req messages from the Slave |
---|
Red | P-X master was receiving Del_Req messages from the Slave but is no longer receiving them |
---|
Unicast Auto: Grey | P-X master had granted the Slave unicast messaging but the P-X master is now inactive |
---|
Green | P-X master has granted the Slave unicast messaging |
---|
Red | P-X master had granted the Slave unicast messaging but this has expired or the slave cancelled it |
---|
Unicast Forced: Grey | Slave not enabled in configuration, or P-X master is inactive |
---|
Green | P-X master is sending Announce/Sync messages to the slave |
---|
Red | (Not used) |
---|
|
...
Related articles
Filter by label (Content by label) |
---|
showLabels | false |
---|
max | 10 |
---|
showSpace | false |
---|
sort | title |
---|
cql | label = in ( "kb-information-article" , "paragon-x" ) |
---|
|