Versions Compared
Key
- This line was added.
- This line was removed.
- Formatting was changed.
SyncE Wander Tolerance using Tones: Option 1 and Enhanced (Tolerance Level 2)
Note that for Enhanced SyncE clocks specified in G.8262.1, there are two tolerance levels; level 2 is the same as the tolerance for standard SyncE clocks as specified in G.8262.
Parameters used:
- Measured at each corner point in G.8262/Figure 7
- At least one point per decade
Frequency (Hz) | MTIE Observation Interval (s) | Amplitude | Test Time | Test Time |
---|---|---|---|---|
10 | 0.032 | 250 | 1500 | 150 |
1 | 0.32 | 250 | 150 | 150 |
0.13 | 2.5 | 250 | 20 | 154 |
0.016 | 20 | 2000 | 4 | 250 |
0.0032 | 100 | 2000 | 4 | 1250 |
0.0008 | 400 | 2000 | 3 | 3750 |
0.00032 | 1000 | 5000 | 3 | 9375 |
SyncE Wander
TransferTolerance using Tones:
OptionEnhanced (Tolerance Level 1)
Parameters used:
- Maximum bandwidth: 10Hz
- Minimum bandwidth: 1Hz
- Maximum gain peaking: 0.2dB
- Minimum gain In pass-band: -3dB
- Noise generation allowance: ±20ns
- Two points per decade, extending more than 2 decades below the -3dB point
- Sampling rate: 30Hz
(Hz
- Measured at each corner point in G.8261/Figure 17
- At least one point per decade
Frequency (Hz) | MTIE Observation Interval (s) | Amplitude (ns) | Test Time (Cycles) | Test Time (s | )Max. Gain) | Min. Gain | Max. Output Amplitude (ns) | Min. Output Amplitude (ns) | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
14.9 | 250 | 2235 | 150 | -5.1 | none | 160 | none | ||||||||||||
9.9 | 250 | 1485 | 150 | -3. | 0none | 198 | none | 3.2 | 250 | 480 | 1500. | 2none | 276 | none | 1 | 25050 | 1501500 | 150469 | |
0. | 2-3.00 | 276 | 156 | 0.32 | 250 | 4832 | 1 | 50 | 150 | 150 | |||||||||
0. | 2-3.00 | 276 | 156 | 0.1 | 320053 | 6 | 300 | 15 | 150283 | ||||||||||
0. | 2-3.00 | 348 | 206 | 0.032 | 100010 | 8 | 250 | 0.2 | -3.00 | 1044 | 687 | 0.01 | 2000 | 4 | 400300 | 4 | 250 | ||
0. | 2-3.00 | 2067 | 1395 | 0.0032 | 20000032 | 100 | 300 | 4 | 1250 | ||||||||||
0. | 2-3.00 | 2067 | 1395 |
Image Removed
SyncE Wander Transfer using Tones: Enhanced
Parameters used:
- Maximum bandwidth: 3Hz
- Minimum bandwidth: 1Hz
- Maximum gain peaking: 0.2dB
- Minimum gain In pass-band: -3dB
- Noise generation allowance: ±5ns
- Two points per decade, extending more than 2 decades below the -3dB point
- Sampling rate: 1kHz
Frequency
(Hz)
Amplitude
(ns)
Test Time
(Cycles)
Test Time
(s)
Max. Gain
(dB)
Min. Gain
(dB)
Max. Output Amplitude (ns)
Min. Output Amplitude (ns)
32
250
2235
150
-5.1
none
29
none
10
250
1485
150
-3.0
none
77
none
3.2
250
480
150
0.2
none
176
none
1
250
150
150
0.2
-3.00
261
171
0.32
250
48
150
0.2
-3.00
261
171
0.1
320
15
150
0.2
-3.00
333
221
0.032
1000
8
250
0.2
-3.00
1029
702
0.01
2000
4
400
0.2
-3.00
2052
1410
0.0032
2000
4
1250
0.2
-3.00
2052
1410
Image Removed
00032 | 1000 | 300 | 3 | 9375 |
---|
Wander Tolerance based on a chain of enhanced clocks:
Image AddedFigure 17/G.8261 - Network limit for wander (MTIE) at enhanced synchronous equipment clock interfaces
SyncE Wander Tolerance using Tones: Option 2
More information regarding how the tones were selected can be found: G.8262: Wander Tolerance and Transfer for Option II Clocks
Parameters used:
- Measured at each corner point in G.8262/Figure 7Tone amplitudes equal to MTIE mask value at the relevant observation interval of G.824/Figure 3
- At least one point per decade
Frequency | MTIE Observation Interval (s) | Amplitude | Test Time | Test Time |
---|---|---|---|---|
3.2 | 0.1 | 300 | 480 | 150 |
0.32 | 1 | 303 | 150 | 150 |
0.032 | 10 | 325 | 8 | 250 |
0.0032 | 100 | 550 | 4 | 1250 |
0.0011 | 280 | 1000 | 3 | 2727 |
0.00032 | 1000 | 1007 | 3 | 9375 |
SyncE Wander Transfer using Tones: Option 2
Parameters used:
- Maximum bandwidth: 0.1Hz
- Minimum bandwidth: none specified
- Maximum gain peaking: 0.2dB
- Minimum gain in pass-band: no criteria, since no minimum bandwidth specified
- Noise generation allowance: ±20ns
- Two points per decade, extending over 2 decades below the -3dB point
- Sampling rate: 30Hz
Frequency
(Hz)
Amplitude
(ns)
Test Time
(Cycles)
Test Time
(s)
Max. Gain
(dB)
Min. Gain
(dB)
Max. Output Amplitude
(ns)
Min. Output Amplitude
(ns)
3.2
300
480
150
-30.1
none
30
none
1
301
150
150
-20.0
none
50
none
0.32
303
48
150
-10.5
none
111
none
0.1
308
15
150
-3.0
none
238
none
0.032
325
8
250
0.2
none
353
none
0.01
380
4
400
0.2
none
409
none
0.0032
550
4
1250
0.2
none
583
none
0.001
1000
3
3000
0.2
none
1044
none
0.00032
1007
3
9375
0.2
none
1051
none
Image Removed
On this page:
Table of Contents