If you have a Spirent SNE Ignite and a valid service contract, software updates are available through the Spirent Customer Service Centre (CSC). On the Downloads page, select the Impairment Product Line.
A CSC login is required to access the Spirent software download area. If you do not yet have a login, please register on the site.
If you have a Calnex SNE Ignite and a valid Calnex Support Service (CSS) contract, software updates can be downloaded from the Calnex Software Download site. Release notes are also available from the same location.
A Software Download login is required to access the software download area. If you do not yet have a login, please contact support@calnexsol.com.
Software upgrade instructions can be found in the SNE Ignite Operating Manual, accessible from the GUI of the instrument.
Version 1.0.0
This is a factory only release.
Please contact Calnex support if version 1 software is required.
Functionality
This is the initial release version for SNE Ignite, featuring:
Support for 10G / 25G
Support for jumbo packets (up to 12,000 byte frames)
Minimum System latency of 6.8μs • Resolution of up to 1ns
Support for delay functionality (Burst, Rate, Rate Periodicity)
Support for filtering and drop impairments
Support for eCPRI/RoE and GTP Filters
Support for live Impairment changes
Support for internal / external Reference Clock
Support for Forward Error Correction
Support 100% line rate
Functionality not part of this release
Jitter impairment - Please note for this release Jitter is disabled – Jitter to be added to upcoming release – contact support for details.
Additional Information
Please note that dual rate 10G/25G optical modules are not supported in SNE Ignite.