At 10G, 25G and 100G, SNE-X uses the same network interface cards as standard SNE and therefore supports the same optics/transceivers.
See Calnex SNE: Which Transceivers/Optical Modules Can I Use? for an up-to-date list of supported optics/transceivers.
At 400G, a list of supported optics/transceivers can be found below.
Transceiver/optical module part numbers and availability are subject to change. The table below is a guide only and may not be up-to-date with each manufacturer’s own information.
It’s recommended to contact Calnex technical support for confirmation on optical module compatibility before procuring any of the below listed modules for use with SNE-X.
Interface | Manufacturer | Part Number | Specifications |
|---|---|---|---|
400GbE Ports | |||
OSFP | NVIDIA | SMF, MPO-12/APC, 1310nm | |
OSFP | FS | SMF, MPO-12/APC, 1310nm | |