Calnex SNE Ignite: Releases

Owned by Paul Hudson
Last updated: Sept 17, 2024
2 min read

If you have an SNE Ignite and a valid Calnex Support Service (CSS) contract, the latest release can be downloaded from the Calnex Customer Support Portal. Release notes are also available from the same location.

Software upgrade instructions can be found in the SNE Ignite Operating Manual, accessible from the GUI of the instrument.

Version 1.1.1

Functionality

Jitter functionality that includes:

  • Added ability to apply jitter through the delay impairment.

  • Generate jitter profiles.

  • Upload and download profiles.

Additional Information

  • Please note that dual rate 10G/25G optical modules are not supported in SNE Ignite.

Please contact Calnex Support via https://calnex-support.com/ to obtain this software release, if required.

Version 1.0.0

This is a factory only release.

Please contact Calnex Support via https://calnex-support.com/ if version 1 software is required.

Functionality

This is the initial release version for SNE Ignite, featuring:

  • 10G and 25G line rates

  • Support for Forward Error Correction at 25G (RS-FEC IEEE 802.3 Clause 108 RS (528,514))

  • Support for Jumbo packets (up to 12,000 byte frames) at all rates

  • Minimum system latency of 6.8us*

  • Constant delay functionality

  • Packet drop functionality (burst, rate, rate periodicity)

  • Filtering of specific traffic types (including eCPRI, RoE and GTP)

  • Live Impairment changes

  • Internal/external Reference Clock

  • 100% line rate

*Refer to product datasheet for full specification.

Functionality not part of this release

  • Jitter impairment - Please note for this release Jitter is disabled – Jitter to be added to upcoming release – contact support for details.

Additional Information

  • Please note that dual rate 10G/25G optical modules are not supported in SNE Ignite.